Steering Frame Lock - Separate and Connect
Show/hide table
 |
|
Personal injury or death can result from machine articulation or movement. Machine frames can move and a person can be crushed. Connect the steering frame lock link between the front and rear frames before working on machine. Secure clevis pin with locking pin. Before operating the machine, fasten the steering frame lock link into the stored position and secure the clevis pin with locking pin. Failure to lock into the stored position before operating can result in loss of steering. |
- Move the machine to a hard, level surface.
- Engage the parking brake.
Show/hide table
Illustration 1 g03607984 Show/hide table
Illustration 2 g03607998 - Remove the cotter pin and pin (2) from steering frame lock (3).
- Rotate steering frame lock (3) upward until steering frame lock (3) aligns with bore (1) in the front frame.
- Install pin (2) and the cotter pin.
- Separate steering frame lock (3) in the reverse order of removal.
Caterpillar Information System:
994K Wheel Loader Plate Locations and Film Locations
D6T Track-Type Tractor Engine Supplement Turbocharger - Remove and Install
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Boom Hydraulic System - Health Check
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Parking Brake
D6T Track-Type Tractor Monitoring System Service Tools
D6T Track-Type Tractor Monitoring System General Information
D7E Track-Type Tractor ARD Spark Plug - Clean
D6T Track-Type Tractor Engine Supplement Secondary Fuel Filter and Base - Remove and Install
336F XE Excavator Machine System Specifications Position Sensor (Boom)
349F and 352F Excavators Machine System Specifications Pressure Sensor - BOOM DOWN
910K and 914K Compact Wheel Loaders Power Train Creeper Control
349F and 352F Excavators Machine System Specifications Pressure Sensor - Accumulator
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Limit Switch (Stop Light) - Adjust
Cat® Terrain for Track-Type Tractor with Blade Control System Components
966M Tier 4 Series XE and 972M Tier 4 Series XE Wheel Loader Power Train Transmission Oil Pump - Remove and Install
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Piston Pump (Implement) - Remove and Install - 45 CC
2014/04/29 Improved Elevator Rollers are Now Available for Certain Wheel Tractor-Scrapers {6260}
621K, 623K and 627K Wheel Tractor-Scrapers Engine Supplement Air Control Valve (ARD Combustion) - Remove and Install - Scraper
C27 and C32 Engines for Caterpillar Built Machines Housing (Rear) - Remove and Install
D6T Track-Type Tractor Engine Supplement Crankshaft Vibration Damper and Pulley - Remove and Install
986H Wheel Loader Engine Supplement Steering Frame Lock - Separate and Connect
D6T Track-Type Tractor Engine Supplement Engine Front Support - Remove and Install
D6T Track-Type Tractor Engine Supplement Crankshaft Front Seal and Wear Sleeve - Remove and Install
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Hydraulic Tank Oil - Retain