Cat products such as engines, transmissions, and major attachments that are not designed for an operator to ride are identified by Serial Numbers.
For quick reference, record the identification numbers in the spaces that are provided below.
| |
| Illustration 1 | g06185081 |
| (1) Machine Product Identification Number (PIN) Plate | |
| |
| Illustration 2 | g06185089 |
|
(2) Engine Serial Number Plate
(3) Torque Converter Serial Number Plate | |
| |
| Illustration 3 | g06185090 |
| (4) Transmission Serial Number Plate | |
Product Identification Number (PIN) (If Equipped)
The PIN plate is positioned in the cab below the console.
| |
| Illustration 4 | g06201159 |
Manufacturer Name and Address ____________________
Model (A)____________________
Build (B)____________________
Product Identification Number (C)____________________
Bar Code (D)____________________
Month and Year of Manufacture Plate (If Required) (E)____________________
CE Plate (If Required) (F)____________________
Address of Manufacturer (G)____________________
Issue (H)____________________
Country of Origin Info Plate (If Required) (I)____________________
Local regulation may require documentation of the month and/or year of manufacture in the Operation and Maintenance Manual. Enter on line (E) above if required.
Product Identification Number (PIN) (If Equipped)
| |
| Illustration 5 | g02436556 |
PIN plate (1) is mounted on the front frame near the articulation joint on the left-hand side of the machine.
Model number (A)____________________
Machine PIN (B)____________________
Service Information Plate (C)____________________
Month and Year of Manufacture (If Required) (D)____________________
CE Plate (If Required) (E)
Country of Origin Info Plate (If Required) (F)
Local regulation may require documentation of the Month and/or Year of Manufacture in the Operation and Maintenance Manual. Comply with these regulations.
Engine Serial Number Plate (2)
The engine serial number plate is on the front of the engine block on the right-hand side of the machine. A film with engine identification information is also on a valve cover near the rear of the engine on the left-hand side of the machine.
Record the information that is given on the engine serial number plate.
Engine Model Number____________________
Engine Serial Number____________________
Engine Arrangement Number____________________
Torque Converter Serial Number Plate (3)
The torque converter serial number plate is located near the top of the torque converter housing, and faces the engine.
Record the information that is given on the torque converter serial number plate.
Torque Converter Serial Number____________________
Torque Converter Arrangement Number____________________
Transmission Serial Number Plate (4)
The transmission serial number plate is on a forward-facing vertical surface near the top of the transmission housing.
Record the information that is given on the transmission serial number plate.
Transmission Serial Number____________________
Transmission Arrangement Number____________________
Note: The CE plate is on machines that are certified to the valid European Union requirements then.
If the machine is equipped with the plate for the European Union, this plate will be attached to the PIN plate. The CE plate is positioned on the bottom left side of the plate for the PIN.
For machines compliant to "2006/42/EC", the following information is stamped onto the CE plate. For quick reference, record this information in the spaces provided below.
| |
| Illustration 6 | g01883459 |
- Engine Power primary engine (kW)____________________
- Engine Power for more engine if equipped (kW)____________________
- Typical machine operating weight for European market (kg)____________________
- Year of construction____________________
- Machine Type____________________
For the name, the address and the country of origin for the manufacturer, see the PIN plate.
For machines compliant to "1998/37/EC", the following information is stamped onto the CE plate. For quick reference, record this information in the spaces provided below.
| |
| Illustration 7 | g01062968 |
- Engine Power primary engine (kW)____________________
- Typical machine operating weight for European market (kg)____________________
- Year ____________________
For machines compliant to the Eurasian Economic Union requirements, the EAC mark plate is positioned near the Product Identification Number (PIN) plate (see Product Information Section of the machine Operation and Maintenance Manual). The EAC mark plate is placed on machines certified to the Eurasian Economic Union requirements effective at the time of market entry.
| |
| Illustration 8 | g06094564 |
The Month and Year of Manufacture are on the PIN plate.
Manufacturer:
Caterpillar Inc.,100 N.E. Adams Street
Peoria, Illinois 61629, USA
Entity authorized by the manufacturer at the territory of Eurasian Economic Union:
Caterpillar Eurasia LLC75, Sadovnicheskaya Emb.
Moscow 115035, Russia
| |
| Illustration 9 | g00933634 |
|
Typical example | |
If equipped, the film is used to verify the environmental sound certification of the machine. The value that is listed on the film indicates the guaranteed sound level. The guaranteed sound level is measured at the time of manufacture. Refer to Operation and Maintenance Manual, "Sound Information and Vibration Information" for the guaranteed sound level for your machine.
Note: This label is on machines that are going into Canada.
| |
| Illustration 10 | g06063443 |
If equipped, this label is located next to the Pin plate. This label verifies that the product meets the requirements of ICES-002 Issue 6. Compliance to ICES-002 Issue 6 is accomplished by meeting electromagnetic emissions industry standard CISPR-12.
| |
| Illustration 11 | g01212098 |
This warning film is ontheinside thecab on the left-hand cab post. This machine has been certified to the standards that are listed on the certification label. The maximum mass of the machine, which includes the operator and the attachments without a payload, should not exceed the mass on the certification label.