Camshaft
Show/hide table
| |
| Illustration 1 | g03153457 |
Show/hide table
| |
| Illustration 2 | g03153458 |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| Before assembly, lubricate the camshaft bearings, the journals, and the lobes with a 50/50 mixture of green 8T-2998 Lubricant and clean engine oil. | |||
| 1 | 1 | 421-0155 Camshaft | The end of the camshaft that is marked "F" must be placed at the front of the engine. |
| 2 | 1 | 421-0176 Camshaft | The end of the camshaft that is marked "F" must be placed at the front of the engine. |
| A | - | - | Diameter of camshaft journal is |
Show/hide table
| |
| Illustration 3 | g03153459 |
Show/hide table
| Item | Qty | Part | Specification Description |
| - | - | - | Use the following procedure in order to determine the actual camshaft lobe lift: 1. Measure camshaft lobe height (C). 2. Measure the base circle (D). 3. Subtract the base circle (D) from the camshaft lobe height (C). The difference is the actual camshaft lobe lift (B). |
| - | - | - | Specified camshaft lobe lift (B) for: |
| Inlet lobe is |
|||
| Exhaust lobe is |
|||
| Injector lobe (right blank) is |
|||
| Injector lobe (left blank) is |
Caterpillar Information System:
993K Wheel Loader C32 Engine Supplement Engine - Install
966K Wheel Loader Electrohydraulic System Monitoring System (Hydraulic Functions)
312D2 and 313D2 Excavators Specifications
The Rear Differential Ring Gear Needs Inspected on Certain 627H Wheel Tractor-Scrapers{3256, 3258} The Rear Differential Ring Gear Needs Inspected on Certain 627H Wheel Tractor-Scrapers{3256, 3258}
C27 and C32 Engines for Caterpillar Built Machines Exhaust Manifold
C27 and C32 Engines for Caterpillar Built Machines Piston and Rings
2012/08/30 New Track Carrier Roller Is Now Used on Certain D6K Track-Type Tractors {4150, 4154}
2012/09/03 A New Procedure To Flush The Elevator System Is Now Available On 623H Wheel Tractor-Scrapers {6210}
993K Wheel Loader Wiring Harness (Open Circuit) - Test
The Air Conditioning Performance Can be Improved by The Installation of a Baffle Arrangement on Certain 621H, 623H, and 627H Wheel Tractor-Scrapers{7320} The Air Conditioning Performance Can be Improved by The Installation of a Baffle Arrangement on Certain 621H, 623H, and 627H Wheel Tractor-Scrapers{7320}
2012/10/08 Baffles Have Been Added to the Engine Compartment to Improve Air Conditioning Performance on Certain 621H, 623H, and 627H Wheel Tractor-Scrapers {7320}
349F and 352F Excavator Machine System Electrical Connector - Inspect
C27 and C32 Engines for Caterpillar Built Machines Gear Group (Rear)
312F, 313F, 316F and 318F Excavators Wiring Harness (Short Circuit) - Test
Reinforcing the Right-Hand and Left-Hand Fenders On the D11R/T{0679, 7252, 7254} Reinforcing the Right-Hand and Left-Hand Fenders On the D11R/T{0679, 7252, 7254}
D5R Track-Type Tractor TA2 Technical Inspection{7000, 753T} D5R Track-Type Tractor TA2 Technical Inspection{7000, 753T}
AD60 Underground Articulated Truck Machine Electrical System Hydraulic Fan System (Power Train)
AD60 Underground Articulated Truck Braking System Brake Accumulator
C27 and C32 Engines for Caterpillar Built Machines Valve Mechanism Cover
C27 and C32 Engines for Caterpillar Built Machines Rotary Actuator - NOx Reduction System
C27 and C32 Engines for Caterpillar Built Machines Gear Group (Front)
C27 and C32 Engines for Caterpillar Built Machines Gear Group (Rear)
C27 and C32 Engines for Caterpillar Built Machines Flywheel Housing
2012/10/26 An Improved Method of Attaching Fuel Pressure Sensor Harness to the Engine of Certain 980H Wheel Loaders Is Now Used {1261, 1262, 1408}