Gear Group (Front)
Show/hide table
Illustration 1 | g03155599 |
Show/hide table
Illustration 2 | g03155600 |
Cam gear bolt tightening sequence |
Show/hide table
Specification for 355-2287 Front Gear Gp | |||
Item | Qty | Part | Specification Description |
1 | 12 | 7K-3116 Bolt | Tighten bolt in the sequence 1, 4, 2, 5, 3, 6, 1, 4 as shown in Illustration 2 to |
2 | 1 | 112-9217 Thrust Plate | Install the thrust plate with the oil groove side toward the idler gear assembly. |
Before assembly, lubricate the thrust faces with clean engine oil. | |||
Thickness is |
|||
3 | 5 | 3G-2292 Locking Bolt | Torque to |
4 | 1 | 117-9712 Drive Idler Shaft | Before assembly, lubricate the shaft with clean engine oil.
Diameter over 128-2661 Bushing end is |
5 | 1 | 300-5575 Idler Gear As | Before assembly, lubricate the bore of 128-2661 Bushing in the idler gear assembly with clean engine oil.
After installation, bore in the bushing for the drive idler shaft is Installation depth of the bushing is |
6 | 1 | 6N-1027 Thrust Plate | Install the thrust plate with the oil groove side toward the idler gear assembly. |
Thickness is |
|||
7 | 1 | 0T-0573 Bolt | Torque to |
8 | 1 | 0S-1571 Bolt | Torque to |
Caterpillar Information System:
C27 and C32 Engines for Caterpillar Built Machines Rotary Actuator - NOx Reduction System
C27 and C32 Engines for Caterpillar Built Machines Valve Mechanism Cover
AD60 Underground Articulated Truck Braking System Brake Accumulator
AD60 Underground Articulated Truck Machine Electrical System Hydraulic Fan System (Power Train)
D5R Track-Type Tractor TA2 Technical Inspection{7000, 753T} D5R Track-Type Tractor TA2 Technical Inspection{7000, 753T}
Reinforcing the Right-Hand and Left-Hand Fenders On the D11R/T{0679, 7252, 7254} Reinforcing the Right-Hand and Left-Hand Fenders On the D11R/T{0679, 7252, 7254}
312F, 313F, 316F and 318F Excavators Wiring Harness (Short Circuit) - Test
C27 and C32 Engines for Caterpillar Built Machines Gear Group (Rear)
C27 and C32 Engines for Caterpillar Built Machines Camshaft
993K Wheel Loader C32 Engine Supplement Engine - Install
966K Wheel Loader Electrohydraulic System Monitoring System (Hydraulic Functions)
312D2 and 313D2 Excavators Specifications
C27 and C32 Engines for Caterpillar Built Machines Gear Group (Rear)
C27 and C32 Engines for Caterpillar Built Machines Flywheel Housing
2012/10/26 An Improved Method of Attaching Fuel Pressure Sensor Harness to the Engine of Certain 980H Wheel Loaders Is Now Used {1261, 1262, 1408}
C27 and C32 Engines for Caterpillar Built Machines Flywheel Housing
Bronze 415-8631 Engine Overhaul Kit for 3176 Machine Engines{1000} Bronze 415-8631 Engine Overhaul Kit for 3176 Machine Engines{1000}
Updating a D6T with the Engine Cooling Fan Bypass Attachment{1356, 1386, 1387, 1408, 1902, 5057, 5264, 7620} Updating a D6T with the Engine Cooling Fan Bypass Attachment{1356, 1386, 1387, 1408, 1902, 5057, 5264, 7620}
993K Wheel Loader Power Train Torque Converter - Remove
2012/07/31 New Implement Software is Now Available on 854K Wheel Dozer {7610, 7620, 7620}
621K, 623K, and 627K Wheel Tractor-Scrapers Systems General Information (Hydraulic System)
2015/05/22 A New Special Instruction REHS5811 Is Available Detailing Instructions For Repairing Certain Nonmetallic Parts on The Listed Small Wheel Loaders {7301, 7305}
2013/10/21 Improved Bolt For The Differential Steering Input Gear Is Now Available For Certain D9T Track-Type Tractors {4131, 4135}
AD60 Underground Articulated Truck Braking System Brake Control Valve (Service)