Failure to comply to the rated load can cause possible personal injury or property damage. Review the rated load of a particular work tool before performing any operation. Make adjustments to the rated load as necessary for non-standard configurations. |
Note: Rated loads should be used as a guideline. Work tools, uneven ground conditions, soft ground conditions, or poor ground conditions have effects on rated loads. The operator is responsible for being aware of these effects.
Illustration 1 | g02605697 |
The information plate (1) for the fork tines is located on the upper left of the frame. Refer to Operation and Maintenance Manual, "Plate Locations and Film Locations" for additional information.
Load Curves
For information on load curves for the forks, contact your Cat dealer.