Torque Converter Inlet Oil Pressure - Test
Show/hide table
Torque Converter Inlet Oil Pressure | |||
---|---|---|---|
Date | Equipment ID Code | ||
Inlet Oil Pressure Specification | Actual | ||
High Idle | |
This procedure will verify the torque converter inlet pressure.
Show/hide table
Illustration 1 | g02571852 |
Tooling (A) 198-4240 Digital Pressure Indicator Gp |
Show/hide table
Tool | Item | Qty | Part No | Description |
---|---|---|---|---|
A | 198-4240 | Digital Pressure Indicator Gp | ||
A1 | 1 | 198-4234 | Digital Indicator | |
A2 | 1 | 198-4237 | Pressure Sensor Gp
(0 to 3,445 kPa (0 to 500 psi)) |
|
A3 | 1 | 198-4236 | Adapter Cable As |
- Operate the machine until the transmission oil temperature reaches normal operating temperature.
- Stop the machine on a hard, level surface. Move the transmission control lever to NEUTRAL.
Show/hide table
Illustration 2 g02609599 Left side of Transmission
(1) Pressure tap for torque converter inlet oil pressure - Remove the dust cap from test port (1). Attach tooling (A) to the test port (1).
- Start the engine. Release the parking brake. Depress the service brake pedal and keep the pedal down.
- Run the engine at high idle. The pressure must be
930 ± 100 kPa (135 ± 15 psi) .
Caterpillar Information System:
621H, 623H and 627H Wheel Tractor-Scrapers Hydraulic and Steering System Elevator Speed - Check - If Equipped
Track Seal Installers and Track Bushing Groove Gauges for Rigid Track Seals {0729, 4150, 7450, 7555} Track Seal Installers and Track Bushing Groove Gauges for Rigid Track Seals {0729, 4150, 7450, 7555}
2011/07/28 Improved AMOCS Radiator now Available for Certain D11 Track-Type Tractors {1353}
VIMS 3G Application Guide{7601} VIMS 3G Application Guide{7601}
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Relief Valve (Main) - Test and Adjust
D6T Track-Type Tractor Electronic Control Systems Event Code List
992K Wheel Loader Fuel System Secondary Filter - Replace
D6T Track-Type Tractor Electronic Control Systems ROPS Flood Lamps Do Not Activate
980K Wheel Loader Work Tool - Lubricate
980K Wheel Loader Work Tool - Inspect
(Custom) Log Fork Rated Load
980K Wheel Loader Differential and Final Drive Oil - Change
992K Wheel Loader Fuel Tank Strainer - Clean
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Synchronizing Valve Pressure - Test and Adjust - Rear Power Train
D6T Track-Type Tractor Electronic Control Systems Diagnostic Code List
D7R Track-Type Bulldozer Cooling System Coolant Level - Check
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Speed Clutch Pressure (P1) and Directional Clutch Pressure (P2) - Test and Adjust - Rear Power Train
(Custom) Log Fork Maintenance Interval Schedule
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562} HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
992K Wheel Loader Electrohydraulic System Lift and Tilt Cylinder Drift - Check
(Custom) Lumber Fork Maintenance Interval Schedule
CG137-08 and CG137-12 Engines Coolant Level - Check
(Custom) Lumber Fork Rated Load
(Custom) Lumber Fork Specifications