G3520C and G3520E Engines Caterpillar


Fuel Lines

Usage:

G3520C GZB



图 1g01287762

(1) 锁紧螺母

扭矩 ... 60 ± 12 N·m (44 ± 9 lb ft)

Caterpillar Information System:

Procedure to Remove Large Wheel Bearing Cups {4001, 4008, 4051, 4215} Procedure to Remove Large Wheel Bearing Cups {4001, 4008, 4051, 4215}
C15 On-Highway Engine Fuel Priming Pump - Remove and Install
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Flywheel Interface PWA
3512C Engine for Caterpillar Built Machines Override Switch
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Pump Drive - Install
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Pump Drive - Remove
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Gear Pump (Torque Converter and Transmission) - Install
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Gear Pump (Torque Converter and Transmission) - Remove
2006/07/17 A New Valve Cover Seal is Now Used {1107, 1120}
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Vacuum Gauge
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Pump Drive - Assemble
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Pump Drive - Disassemble
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Vacuum Pump
3606 and 3608 Engines Aftercooler - Install
3512C Engine for Caterpillar Built Machines Permanent Timing Calibration Sensor
3500 and 3500B Engines Maintenance Recommendations
3512C Engine for Caterpillar Built Machines Pulse Width Modulated Sensor
3512C Engine for Caterpillar Built Machines Sensor Supply
3512C Engine for Caterpillar Built Machines Speed Control
3606 and 3608 Engines Air Inlet Shutoff - Remove and Install
C15 On-Highway Engine Turbocharger - Remove - Low Pressure
C15 On-Highway Engine Turbocharger - Install - Low Pressure
Ampseal 16 Connector Peripheral Seal Servicing{7553} Ampseal 16 Connector Peripheral Seal Servicing{7553}
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Lockup Clutch and Solenoid Valve (Torque Converter) - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.