Gear Pump (Torque Converter and Transmission) - Remove
拆卸步骤
注: 清洁度是一项重要的因素。 解体步骤开始之前，应彻底清洁部件外部。 这将有助于防止脏污进入内部机构。
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 将传动系油排入合适的容器以便保存或废弃这些油。
- 卸下软管 (1) 。
Show/hide table
 | |
| 图 1 | g01287607 |
- 将适当的起吊设备连接在齿轮泵 (2) 上。 齿轮泵 (2) 的重量约为 27 kg (60 lb)。
Show/hide table
 | |
| 图 2 | g01287608 |
- 卸下螺栓 (3) 和齿轮泵 (2) 。
Caterpillar Information System:
2006/07/17 A New Valve Cover Seal is Now Used {1107, 1120}
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Vacuum Gauge
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Pump Drive - Assemble
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Pump Drive - Disassemble
3512C Engine for Caterpillar Built Machines Injector Solenoids
Salvage of Differential Bearing Cage on Off-Highway Trucks {3258, 3283, 3284} Salvage of Differential Bearing Cage on Off-Highway Trucks {3258, 3283, 3284}
C15 On-Highway Engine Turbocharger - Install - High Pressure
C15 On-Highway Engine Turbocharger - Remove - High Pressure
12M, 140M and 160M Motor Graders Hydraulic and Steering System Relief Valve (Main)
C175-16 Locomotive Engine Turbocharger
C15 On-Highway Engine Fuel Transfer Pump - Install
C15 On-Highway Engine Fuel Transfer Pump - Remove
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Gear Pump (Torque Converter and Transmission) - Install
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Pump Drive - Remove
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Pump Drive - Install
3512C Engine for Caterpillar Built Machines Override Switch
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Flywheel Interface PWA
C15 On-Highway Engine Fuel Priming Pump - Remove and Install
Procedure to Remove Large Wheel Bearing Cups {4001, 4008, 4051, 4215} Procedure to Remove Large Wheel Bearing Cups {4001, 4008, 4051, 4215}
G3520C and G3520E Engines Fuel Lines
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Vacuum Pump
3606 and 3608 Engines Aftercooler - Install
3512C Engine for Caterpillar Built Machines Permanent Timing Calibration Sensor
3500 and 3500B Engines Maintenance Recommendations