Fuel Transfer Pump - Install
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install O-ring seal (4) on fuel transfer pump (3). Lubricate the O-ring seal with clean engine oil.
Show/hide table
Illustration 1 | g01287425 |
- Install fuel transfer pump (3) .
- Install bolts (2) .
- Connect tube assembly (1) .
- Turn the fuel supply valve to the "ON" position.
- Remove the air from the fuel system. Refer to Testing and Adjusting, "Fuel System - Prime".
Caterpillar Information System:
C15 On-Highway Engine Fuel Transfer Pump - Remove
Index of Repair Process Engineering Publications {0374, 1000, 7000} Index of Repair Process Engineering Publications {0374, 1000, 7000}
Procedure for Obtaining Full Speed On Marine Propulsion Engines with an Electronic Control Module {1901} Procedure for Obtaining Full Speed On Marine Propulsion Engines with an Electronic Control Module {1901}
2006/07/17 A New Seal is Used for the Auxiliary Water Pump {1371}
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Rotor Position Sensor Assembly
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Prelube Pump - Inspect
C175-16 Locomotive Engine Valve Mechanism
3606 and 3608 Engines Aftercooler - Assemble
TA22 Transmission Relief Valve - Remove and Install - Cooler Relief Valve
2006/07/24 A New Cylinder Head Gasket is Used {1124}
2006/07/10 A Cylinder Head Gasket was Reinstated {1124}
C175-16 Locomotive Engine Aftercooler
C175-16 Locomotive Engine Turbocharger
12M, 140M and 160M Motor Graders Hydraulic and Steering System Relief Valve (Main)
C15 On-Highway Engine Turbocharger - Remove - High Pressure
C15 On-Highway Engine Turbocharger - Install - High Pressure
Salvage of Differential Bearing Cage on Off-Highway Trucks {3258, 3283, 3284} Salvage of Differential Bearing Cage on Off-Highway Trucks {3258, 3283, 3284}
3512C Engine for Caterpillar Built Machines Injector Solenoids
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Pump Drive - Disassemble
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Pump Drive - Assemble
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Vacuum Gauge
2006/07/17 A New Valve Cover Seal is Now Used {1107, 1120}
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Gear Pump (Torque Converter and Transmission) - Remove
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Gear Pump (Torque Converter and Transmission) - Install