3606 and 3608 Engines Caterpillar


Aftercooler - Assemble

Usage:

3608 6MC

Assembly Procedure



    Illustration 1g01287099

  1. Install a new O-ring seal (4) on the aftercooler housing.

  2. Attach a suitable lifting device to aftercooler core (2). The weight of aftercooler core (2) is approximately 180 kg (400 lb). Install aftercooler core (2) in the aftercooler housing.

  3. Install a new O-ring seal (1). Install bolts (3).

End By:

  1. Install the aftercooler. Refer to Disassembly and Assembly, "Aftercooler - Install".

Caterpillar Information System:

TA22 Transmission Relief Valve - Remove and Install - Cooler Relief Valve
2006/07/24 A New Cylinder Head Gasket is Used {1124}
2006/07/10 A Cylinder Head Gasket was Reinstated {1124}
C175-16 Locomotive Engine Aftercooler
3512C Engine for Caterpillar Built Machines Starting Motor System
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Flywheel Assembly
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Specifications - Modbus Register Map
3606 and 3608 Engines Aftercooler - Disassemble
3612 and 3616 Engines Cylinder Head Valves
C175-16 and C175-20 Generator Set Engines Air Inlet and Exhaust System Operation
C15 On-Highway Engine Fuel Filter Base - Assemble
C15 On-Highway Engine Fuel Filter Base - Disassemble
C175-16 Locomotive Engine Valve Mechanism
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Prelube Pump - Inspect
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Rotor Position Sensor Assembly
2006/07/17 A New Seal is Used for the Auxiliary Water Pump {1371}
Procedure for Obtaining Full Speed On Marine Propulsion Engines with an Electronic Control Module {1901} Procedure for Obtaining Full Speed On Marine Propulsion Engines with an Electronic Control Module {1901}
Index of Repair Process Engineering Publications {0374, 1000, 7000} Index of Repair Process Engineering Publications {0374, 1000, 7000}
C15 On-Highway Engine Fuel Transfer Pump - Remove
C15 On-Highway Engine Fuel Transfer Pump - Install
C175-16 Locomotive Engine Turbocharger
12M, 140M and 160M Motor Graders Hydraulic and Steering System Relief Valve (Main)
C15 On-Highway Engine Turbocharger - Remove - High Pressure
C15 On-Highway Engine Turbocharger - Install - High Pressure
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.