TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Caterpillar


Pump Drive - Install

Usage:

TH48-E70 JGC

安装步骤

表 1
需要的工具    
工具     零件号     零件名称     数量    
B     1U-8846     密封垫密封胶     1    

注: 清洁度是一项重要的因素。 组装之前,应使用清洗剂彻底清洁所有零件。 让零件风干。 不要使用抹布擦干零部件。 棉绒可能会留在零部件上,从而可能导致以后出现故障。 检查所有零件。 如果任何零件磨损或损坏,则应使用新件进行更换。




    图 1g01287675

  1. 将工具 (B) 涂敷在泵驱动 (2) 的配合面上,将泵驱动 (2) 安置在变速箱上。

  1. 安装螺栓 (1) 。

End By: 安装齿轮泵。 请参阅 解体和组装, "变矩器和变速箱齿轮泵 - 安装"。

Caterpillar Information System:

TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Pump Drive - Remove
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Gear Pump (Torque Converter and Transmission) - Install
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Gear Pump (Torque Converter and Transmission) - Remove
2006/07/17 A New Valve Cover Seal is Now Used {1107, 1120}
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Vacuum Gauge
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Pump Drive - Assemble
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Pump Drive - Disassemble
3512C Engine for Caterpillar Built Machines Injector Solenoids
Salvage of Differential Bearing Cage on Off-Highway Trucks {3258, 3283, 3284} Salvage of Differential Bearing Cage on Off-Highway Trucks {3258, 3283, 3284}
C15 On-Highway Engine Turbocharger - Install - High Pressure
C15 On-Highway Engine Turbocharger - Remove - High Pressure
12M, 140M and 160M Motor Graders Hydraulic and Steering System Relief Valve (Main)
3512C Engine for Caterpillar Built Machines Override Switch
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Flywheel Interface PWA
C15 On-Highway Engine Fuel Priming Pump - Remove and Install
Procedure to Remove Large Wheel Bearing Cups {4001, 4008, 4051, 4215} Procedure to Remove Large Wheel Bearing Cups {4001, 4008, 4051, 4215}
G3520C and G3520E Engines Fuel Lines
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Vacuum Pump
3606 and 3608 Engines Aftercooler - Install
3512C Engine for Caterpillar Built Machines Permanent Timing Calibration Sensor
3500 and 3500B Engines Maintenance Recommendations
3512C Engine for Caterpillar Built Machines Pulse Width Modulated Sensor
3512C Engine for Caterpillar Built Machines Sensor Supply
3512C Engine for Caterpillar Built Machines Speed Control
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.