Removal Procedure
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Turn the fuel supply to the "OFF" position.
- Remove bolts (1). Remove fuel priming pump assembly (2) from fuel filter base (4) .
 | |
| Illustration 1 | g01287724 |
- Remove gasket (3) from fuel priming pump assembly (2) and fuel filter base (4) .
Installation Procedure
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position gasket (3) on fuel filter base (4) .
| | |
| Illustration 2 | g01287724 |
- Position fuel priming pump assembly (2) on fuel filter base (4) and install bolts (1) .
- Turn the fuel supply to the "ON" position.
- Remove the air from the system. Refer to Testing and Adjusting, "Fuel System - Prime".