C175-16 Locomotive Engine Caterpillar


Connecting Rod and Main Bearing Journals

Usage:

C175-16 3A9
Refer to Guidelines For Reusable Parts, SEBF8009, "Main Bearings And Connecting Rod Bearings" for more information.

Connecting Rod Bearing Journals

Table 1
Diameter Of Crankshaft Journal (Bearing Surface) For Connecting Rod Bearings 
Original Size Journal  150 mm (5.9055 inch) 
Undersize Journal
0.63 mm (0.025 inch) 
149.37 mm (5.8807 inch) 
Undersize Journal
1.27 mm (0.050 inch) 
148.73 mm (5.8555 inch) 

Clearance between bearing and new journal ... 0.172 to 0.295 mm (0.0068 to 0.0116 inch)

Main Bearing Journals

Table 2
Diameter Of Crankshaft Journal (Bearing Surface) For Main Bearings 
Original Size Journal  200 mm (7.8740 inch) 
Undersize Journal
0.63 mm (0.025 inch) 
199.37 mm (7.8492 inch) 
Undersize Journal
1.27 mm (0.050 inch) 
198.73 mm (7.8240 inch) 

Clearance between bearing and new journal ... 0.145 to 0.262 mm (0.0057 to 0.0103 inch)

Caterpillar Information System:

C4.4 Industrial Engine Connecting Rod - Inspect
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Fan (Inverter Cabinet)
Set and Test the Overspeed Verification Switch{7410, 7427, 7490} Set and Test the Overspeed Verification Switch{7410, 7427, 7490}
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Transformer (T7)
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Thermistor (Inverter Cabinet)
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys General Purpose Interface PWA (Inverter Cabinet)
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Diode Rectifier
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542} Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
2006/06/01 Improved Seal on Filters {1308}
Reset the Real Time Clock After Maintenance for On-Highway Truck Engines{1900, 1901} Reset the Real Time Clock After Maintenance for On-Highway Truck Engines{1900, 1901}
C175-16 Engine for 795F Series AC Off-Highway Trucks Crankshaft - Type 1
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Current Transformer (Inverter Cabinet)
C175-16 Locomotive Engine Crankshaft Wear Sleeves and Seals
C4.4 Industrial Engine Cylinder Head - Inspect
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Internal Component Preremoval Steps (Flywheel Cabinet)
C13, C15, and C18 Tier 4 Final Engines Cylinder Block
C13, C15, and C18 Tier 4 Final Engines Connecting Rod
C175-16 and C175-20 Generator Set Engines Alternator and Regulator
3500B Industrial Engine Safety Messages
C4.4 Industrial Engine Cleanliness of Fuel System Components
TA22-4WD Agricultural Transmission Transmission
C6.6 Engines for Caterpillar Built Machines Crankcase Breather
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Fuse (Flywheel Cabinet)
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Speed Sensor (Drive Disconnect) (Transmission Output)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.