C4.4 Industrial Engine Caterpillar


Cylinder Head - Inspect

Usage:

C4.4 444

  • 从发动机上拆下缸盖。

    1. 拆下水温调节器壳体。

    1. 检查缸盖有无气体或冷却液泄漏的迹象。

    1. 卸下阀门弹簧和阀门。

    1. 彻底清洁缸盖底面。 清洁冷却液通道和机油道。 确保缸盖与缸体的接触面清洁、光滑和平整。

    1. 检查缸盖底面有无点蚀、腐蚀和裂纹。 检查阀座镶圈及喷油器喷嘴孔的周围。

    1. 在 200 kPa (29 psi)的压力下测试缸盖是否泄漏。



      图 1g01336211

      缸盖平直度(典型示例)

      (A) 侧到侧

      (B) 端到端

      (C) 对角线

    1. 测量缸盖的平直度。 使用直尺和塞尺检查缸盖是否翘曲。

      • 测量缸盖侧面间 (A) 的平直度。

      • 测量缸盖端面间 (B) 的平直度。

      • 测量缸盖对角间 (C) 的平直度。

      关于平直度的要求,请参阅规格, "缸盖"。

  • Caterpillar Information System:

    C175-16 Locomotive Engine Crankshaft Wear Sleeves and Seals
    C175-16 Locomotive Engine Connecting Rod and Main Bearing Journals
    C4.4 Industrial Engine Connecting Rod - Inspect
    UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Fan (Inverter Cabinet)
    Set and Test the Overspeed Verification Switch{7410, 7427, 7490} Set and Test the Overspeed Verification Switch{7410, 7427, 7490}
    UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Transformer (T7)
    UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Thermistor (Inverter Cabinet)
    UPS 1000S/ UPS 1200S Uninterruptible Power Supplys General Purpose Interface PWA (Inverter Cabinet)
    UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Diode Rectifier
    Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542} Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
    2006/06/01 Improved Seal on Filters {1308}
    Reset the Real Time Clock After Maintenance for On-Highway Truck Engines{1900, 1901} Reset the Real Time Clock After Maintenance for On-Highway Truck Engines{1900, 1901}
    UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Internal Component Preremoval Steps (Flywheel Cabinet)
    C13, C15, and C18 Tier 4 Final Engines Cylinder Block
    C13, C15, and C18 Tier 4 Final Engines Connecting Rod
    C175-16 and C175-20 Generator Set Engines Alternator and Regulator
    3500B Industrial Engine Safety Messages
    C4.4 Industrial Engine Cleanliness of Fuel System Components
    TA22-4WD Agricultural Transmission Transmission
    C6.6 Engines for Caterpillar Built Machines Crankcase Breather
    UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Fuse (Flywheel Cabinet)
    TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Speed Sensor (Drive Disconnect) (Transmission Output)
    C4.4 Industrial Engine Compression - Test
    325D and 329D Excavators and 325D Material Handler Machine System Specifications Swivel
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.