Cleanliness of Fuel System Components
发动机的清洁度
Show/hide table
注意 |
---|
运行燃油系统时保持高清洁度非常重要,因为即便是微小粒子也可能会导致发动机或燃油系统出现故障。 |
在维修燃油系统前,为了清除灰尘和松散碎屑,应使用高压水系统清洗整个发动机。 确保高压水不要对准密封喷油器。
环境
如有可能,维修区应保持相对密封,确保组件不受空气中的灰尘和碎屑污染。 当卸下系统中的组件时,应立即使用适当的密封塞密封暴露的燃油接头。 只有组件重新连接时才能卸下密封塞。 密封塞不得重复使用。 密封塞使用后应立即丢弃。 要获取正确的密封圈,请联系离您最近的 Caterpillar 代理商或授权的 Caterpillar 分销商。
新部件
高压管路不可重复使用。 新高压管路只可安装在一个位置。 更换高压管路时,不要弯曲或扭曲新管路。 管道的内部损坏可能会引起金属粒子进入燃油。
所有新燃油滤清器、高压管路、管道组件和部件均附带密封塞。 只有安装新部件时才可卸下这些密封件。 如果新部件不附带密封圈,则不应使用该部件。
技术人员必须穿戴适当的橡胶手套。 维修完成后,应立即丢弃橡胶手套,以免造成系统污染。
加油
为了向柴油油箱加油,加油泵和油箱盖组件必须清洁且无灰尘和碎屑。 只有当外界条件免受灰尘、风和雨水影响时,才可进行加油。 仅使用未受污染且符合操作和保养手册, "油液建议"燃油技术参数中的技术参数的燃油。
Caterpillar Information System:
3500B Industrial Engine Safety Messages
C175-16 and C175-20 Generator Set Engines Alternator and Regulator
C13, C15, and C18 Tier 4 Final Engines Connecting Rod
C13, C15, and C18 Tier 4 Final Engines Cylinder Block
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Internal Component Preremoval Steps (Flywheel Cabinet)
C4.4 Industrial Engine Cylinder Head - Inspect
C175-16 Locomotive Engine Crankshaft Wear Sleeves and Seals
C175-16 Locomotive Engine Connecting Rod and Main Bearing Journals
C4.4 Industrial Engine Connecting Rod - Inspect
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Fan (Inverter Cabinet)
Set and Test the Overspeed Verification Switch{7410, 7427, 7490} Set and Test the Overspeed Verification Switch{7410, 7427, 7490}
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Transformer (T7)
TA22-4WD Agricultural Transmission Transmission
C6.6 Engines for Caterpillar Built Machines Crankcase Breather
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Fuse (Flywheel Cabinet)
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Speed Sensor (Drive Disconnect) (Transmission Output)
C4.4 Industrial Engine Compression - Test
325D and 329D Excavators and 325D Material Handler Machine System Specifications Swivel
2006/07/03 A New Speed-Timing Sensor is Available {1912}
C175-16 Locomotive Engine Engine Speed Sensor
390F Excavator Machine Systems Travel Motor - Disassemble
C32 Power Module Engine Valve Lash - Inspect/Adjust
C6.6 Engines for Caterpillar Built Machines Fuel Priming Pump
3606 and 3608 Engines Engine Lifting Bracket - Remove and Install