A New Speed-Timing Sensor is Available {1912}
- Engine:
- 3176B (S/N: 9WK1-UP; 3NL1-UP)
- Marine Engine:
- C32 (S/N: RXB1-UP)
- Excavator:
- W345BSeries II (S/N: ANJ1-UP)
- 3176C (S/N: 2AW1-UP; 6BW1-UP)
- 3196 (S/N: 2XR1-UP; 1DW1-UP)
- 3406E (S/N: 9NN1-UP; 6BR1-UP; 9WR1-UP)
- 3408E (S/N: 7PR1-UP)
- 3412E (S/N: Z2D1-UP; 4CR1-UP; 9KS1-UP; BDT1-UP; BFT1-UP; 9PW1-UP)
- 3456 (S/N: 3LW1-UP)
- C30 (S/N: CLX1-UP)
A new speed-timing sensor for engines is now available. The 265-9033 Speed Sensor Group replaces the 129-6628 Speed Sensor Group. The 265-9033 Speed Sensor Group has enhanced sensitivity that is due to improvements that have been made in the design of the new sensor over the self-adjusting slip head sensors that had been used previously. No adjustments are necessary for installation.
Caterpillar Information System:
325D and 329D Excavators and 325D Material Handler Machine System Specifications Swivel
C4.4 Industrial Engine Compression - Test
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Speed Sensor (Drive Disconnect) (Transmission Output)
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Fuse (Flywheel Cabinet)
C6.6 Engines for Caterpillar Built Machines Crankcase Breather
TA22-4WD Agricultural Transmission Transmission
C4.4 Industrial Engine Cleanliness of Fuel System Components
3500B Industrial Engine Safety Messages
C175-16 and C175-20 Generator Set Engines Alternator and Regulator
C13, C15, and C18 Tier 4 Final Engines Connecting Rod
C13, C15, and C18 Tier 4 Final Engines Cylinder Block
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Internal Component Preremoval Steps (Flywheel Cabinet)
C175-16 Locomotive Engine Engine Speed Sensor
390F Excavator Machine Systems Travel Motor - Disassemble
C32 Power Module Engine Valve Lash - Inspect/Adjust
C6.6 Engines for Caterpillar Built Machines Fuel Priming Pump
3606 and 3608 Engines Engine Lifting Bracket - Remove and Install
349F and 352F Excavators Machine System Specifications Control Valve (Boom Lowering) - Manual
568 Forest Machine Machine System Specifications Front Idler
2006/07/03 Change to the Design of the Wiring Harness {1408, 7422}
C4.4 Industrial Engine Piston Height - Inspect
2006/08/14 New Procedure for Measuring the Connecting Rod {1218, 1225}
Inspection and Testing of the Air Shutoff{1078} Inspection and Testing of the Air Shutoff{1078}
C9 On-highway Engine Engine to Transmission Adapter