Fan Drive - Remove and Install
开始:
- 拆下风扇。 请参阅拆解和组装, "风扇 - 拆卸和安装"。
- 从风扇驱动 (2) 上卸下螺栓 (1)。
注: 确定风扇驱动的方向和位置。
- 卸下风扇驱动 (2)。
Show/hide table
图 1 | g00944500 |
典型实例 |
- 检查风扇驱动是否磨损或损坏。 风扇驱动是一个不可维修的部件。 如果风扇驱动磨损或损坏,则更换风扇驱动。
- 安装风扇驱动 (2)。
注: 确保风扇驱动的方向正确。
- 安装螺栓 (1)。 将螺栓拧紧至扭矩
44 N·m (32 lb ft) 。
Show/hide table
图 2 | g00944500 |
典型实例 |
结束:
- 安装风扇。 请参阅拆解和组装, "风扇 - 拆卸和安装"。
Caterpillar Information System:
C4.4 Industrial Engine Fan - Remove and Install
C4.4 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
C4.4 Industrial Engine Exhaust Elbow - Remove and Install
C4.4 Industrial Engine Engine Oil Relief Valve - Remove and Install - Engines Without a Balancer Unit
C4.4 Industrial Engine Engine Oil Relief Valve - Remove and Install - Engines with a Balancer Unit
C4.4 Industrial Engine Engine Oil Pump - Remove and Install - Engines Without a Balancer Unit
C4.4 Industrial Engine Engine Oil Pressure Sensor - Remove and Install
C4.4 Industrial Engine Engine Oil Pan - Remove and Install - Aluminum and Pressed Steel Oil Pans
C15 On-Highway Engine Alternator Mounting
C4.4 Industrial Engine Engine Oil Pan - Remove and Install - Cast Iron Oil Pan
C4.4 Industrial Engine Engine Oil Filter Base - Remove and Install
C4.4 Industrial Engine Engine Oil Cooler - Remove
C4.4 Industrial Engine Flywheel - Install
C4.4 Industrial Engine Flywheel - Remove
C4.4 Industrial Engine Flywheel Housing - Remove and Install
C4.4 Industrial Engine Front Cover - Remove and Install
C4.4 Industrial Engine Fuel Filter Base - Remove and Install - Secondary Fuel Filter
C4.4 Industrial Engine Fuel Injection Lines - Install
C4.4 Industrial Engine Fuel Injection Lines - Remove
C4.4 Industrial Engine Fuel Injection Pump - Install
C4.4 Industrial Engine Fuel Injection Pump - Remove
C4.4 Industrial Engine Fuel Injection Pump Gear - Install
C4.4 Industrial Engine Fuel Injection Pump Gear - Remove
C4.4 Industrial Engine Fuel Manifold (Rail) - Remove and Install