Vibration Damper and Pulley - Remove and Install
- Remove bolts (1) and remove spacer (2). Remove vibration damper (3).
Show/hide table
Illustration 2 g01262962 - Remove bolts (4) and remove spacer (5). Remove pulley (6).
Show/hide table
Illustration 1 | g01262960 |
- Install pulley (6). Install spacer (4) and bolts (5). Tighten bolts (5) to a torque of
200 ± 25 N·m (148 ± 18 lb ft) .Show/hide tableIllustration 4 g01262960 - Install vibration damper (3). Install spacer (2) and bolts (1). Tighten bolts (1) to a torque of
55 ± 10 N·m (41 ± 7 lb ft) .
Show/hide table
Illustration 3 | g01262962 |
Caterpillar Information System:
C7 On-Highway Engine Water Pump - Install
C7 On-Highway Engine Water Pump - Remove
C7 PETROLEUM Petroleum Engine Unit Injector Hydraulic Pump - Install
C175-16 Locomotive Engine Engine Design
C7 PETROLEUM Petroleum Engine Unit Injector Hydraulic Pump - Remove
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System Programmable Parameters
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies DC Bus Voltage - Calibrate
C7 On-Highway Engine Fuel Injection Pump - Install
325D and 329D Excavators and 325D Material Handler Machine System Specifications Control Valve (Auxiliary) - Medium Pressure
C13 Engine Pistons and Connecting Rods - Install
C13 Engine Pistons and Connecting Rods - Remove
325D and 329D Excavators and 325D Material Handler Machine System Specifications Solenoid Valve (Work Tool, 4-Function)
C7 Industrial Engines Camshaft Bearings - Remove
C7 Industrial Engines Pistons and Connecting Rods - Install
C7 Industrial Engines Housing (Front) - Install
C175-16 and C175-20 Generator Set Engines Fuel Filter (Primary)
C7 PETROLEUM Petroleum Engine Crankshaft Rear Seal - Remove
C7 PETROLEUM Petroleum Engine Electronic Unit Injector Sleeve - Remove
C7 PETROLEUM Petroleum Engine Electronic Unit Injector Sleeve - Install
C7 PETROLEUM Petroleum Engine Engine Oil Pump - Disassemble
C7 Industrial Engines Engine Oil Pump - Assemble
C7 On-Highway Engine Front Cover - Remove
C7 On-Highway Engine Front Cover - Install
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies AC Voltage - Calibrate