Programmable Parameters
Refer to Special Instruction, REHS4541, "Software Configuration Guide" for instructions in order to configure the software.
Caterpillar Information System:
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies DC Bus Voltage - Calibrate
C7 On-Highway Engine Fuel Injection Pump - Install
325D and 329D Excavators and 325D Material Handler Machine System Specifications Control Valve (Auxiliary) - Medium Pressure
C13 Engine Pistons and Connecting Rods - Install
C13 Engine Pistons and Connecting Rods - Remove
325D and 329D Excavators and 325D Material Handler Machine System Specifications Solenoid Valve (Work Tool, 4-Function)
3500B Industrial Engines with the ADEM 3 Electronic Control Module Diagnostic Code List
C9 On-highway Engine Turbocharger Oil Lines
C13 Engine Inlet and Exhaust Valve Springs - Remove and Install
C7 On-Highway Engine Lifter Group - Remove and Install
C9 On-highway Engine Engine Oil Pan
C11 and C13 Petroleum Engines Rocker Arm - Assemble
C7 PETROLEUM Petroleum Engine Unit Injector Hydraulic Pump - Remove
C175-16 Locomotive Engine Engine Design
C7 PETROLEUM Petroleum Engine Unit Injector Hydraulic Pump - Install
C7 On-Highway Engine Water Pump - Remove
C7 On-Highway Engine Water Pump - Install
C7 On-Highway Engine Vibration Damper and Pulley - Remove and Install
C7 Industrial Engines Camshaft Bearings - Remove
C7 Industrial Engines Pistons and Connecting Rods - Install
C7 Industrial Engines Housing (Front) - Install
C175-16 and C175-20 Generator Set Engines Fuel Filter (Primary)
C7 PETROLEUM Petroleum Engine Crankshaft Rear Seal - Remove
C7 PETROLEUM Petroleum Engine Electronic Unit Injector Sleeve - Remove