Rocker Arm - Assemble
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1P-0510 | Driver Gp | 1 |
- Use Tooling (A) to install the bushings for rocker arms (3). For correct bearing dimensions, refer to Specifications, "Electronic Unit Injector Rocker Arm" and Specifications, "Valve Mechanism".
Show/hide table
Illustration 1 g01262570 - Install stand (5), rocker arms (4), rocker arms (3), and rocker arms (2) onto shaft (6).
Note: Stand (5) has an offset hole.
- Install stands (1).
End By:
- Install the rocker arm and shaft. Refer to Disassembly and Assembly, "Rocker Arm and Shaft - Install".
Caterpillar Information System:
C11 and C13 Petroleum Engines Rocker Arm - Disassemble
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Gear Pump (Transmission)
3500B Industrial Engines with the ADEM 3 Electronic Control Module Electrical Connectors and Functions
C7 On-highway Engine Air Lines - Aftertreatment Regeneration Device
C7 On-Highway Engine Fuel Injection Pump - Remove
CX31 On-Highway Transmission Oil Filter (Transmission)
C7 and C9 On-highway Engines Emissions Certification Film
CX28 On-Highway Transmission Drive Plate
C7 PETROLEUM Petroleum Engine Water Temperature Regulator - Remove and Install
C7 On-Highway Engine Rocker Shaft and Pushrod - Install
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 3825 - FMI 8
C7 On-Highway Engine Rocker Shaft and Pushrod - Remove
C9 On-highway Engine Engine Oil Pan
C7 On-Highway Engine Lifter Group - Remove and Install
C13 Engine Inlet and Exhaust Valve Springs - Remove and Install
C9 On-highway Engine Turbocharger Oil Lines
3500B Industrial Engines with the ADEM 3 Electronic Control Module Diagnostic Code List
325D and 329D Excavators and 325D Material Handler Machine System Specifications Solenoid Valve (Work Tool, 4-Function)
C13 Engine Pistons and Connecting Rods - Remove
C13 Engine Pistons and Connecting Rods - Install
325D and 329D Excavators and 325D Material Handler Machine System Specifications Control Valve (Auxiliary) - Medium Pressure
C7 On-Highway Engine Fuel Injection Pump - Install
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies DC Bus Voltage - Calibrate
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System Programmable Parameters