Water Pump - Remove
Start By:
- Remove the alternator. Refer to Disassembly and Assembly, "Alternator - Remove and Install".
- Drain the coolant from the cooling system into a suitable container for storage or for disposal. Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Show/hide table
Illustration 1 g01262939 - Remove bolts (1). Remove bolts (3). Remove bracket (2).
Show/hide table
Illustration 2 g01262940 - Loosen hose clamp (5). Disconnect hose (4). Disconnect tube assembly (6).
Show/hide table
Illustration 3 g01262941 - Disconnect tube assembly (8). Remove bolts (7). Remove water pump (9).
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Caterpillar Information System:
C7 PETROLEUM Petroleum Engine Unit Injector Hydraulic Pump - Install
C175-16 Locomotive Engine Engine Design
C7 PETROLEUM Petroleum Engine Unit Injector Hydraulic Pump - Remove
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System Programmable Parameters
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies DC Bus Voltage - Calibrate
C7 On-Highway Engine Fuel Injection Pump - Install
325D and 329D Excavators and 325D Material Handler Machine System Specifications Control Valve (Auxiliary) - Medium Pressure
C13 Engine Pistons and Connecting Rods - Install
C13 Engine Pistons and Connecting Rods - Remove
325D and 329D Excavators and 325D Material Handler Machine System Specifications Solenoid Valve (Work Tool, 4-Function)
3500B Industrial Engines with the ADEM 3 Electronic Control Module Diagnostic Code List
C9 On-highway Engine Turbocharger Oil Lines
C7 On-Highway Engine Water Pump - Install
C7 On-Highway Engine Vibration Damper and Pulley - Remove and Install
C7 Industrial Engines Camshaft Bearings - Remove
C7 Industrial Engines Pistons and Connecting Rods - Install
C7 Industrial Engines Housing (Front) - Install
C175-16 and C175-20 Generator Set Engines Fuel Filter (Primary)
C7 PETROLEUM Petroleum Engine Crankshaft Rear Seal - Remove
C7 PETROLEUM Petroleum Engine Electronic Unit Injector Sleeve - Remove
C7 PETROLEUM Petroleum Engine Electronic Unit Injector Sleeve - Install
C7 PETROLEUM Petroleum Engine Engine Oil Pump - Disassemble
C7 Industrial Engines Engine Oil Pump - Assemble
C7 On-Highway Engine Front Cover - Remove