Unit Injector Hydraulic Pump - Install
安装步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 安装齿轮 (8) 、垫圈 (9) 和螺母 (10) 。 拧紧螺母 (10) 至扭矩为 65 ± 3 N·m (48 ± 2 lb ft)。 更加单体喷油器液压泵 (1) 上的 O 形密封圈 (11) 。
Show/hide table
| 图 1 | g01150295 |
- 在前壳体中定位单体喷油器液压泵 (1) 。
Show/hide table
 | |
| 图 2 | g01263139 |
- 支撑单体喷油器液压泵 (1) 并安装螺栓 (7) 和垫圈。
- 连接软管组件 (3) 、 (6) 和 (5) 。
Show/hide table
 | |
| 图 3 | g01262910 |
- 连接管组件 (4) 。
- 将线束组件 (2) 连接到单体喷油器液压泵 (1) 上。
End By: 安装空气压缩机。 请参阅 拆解和组装, "空气压缩机 - 拆卸和安装"。
Caterpillar Information System:
C175-16 Locomotive Engine Engine Design
C7 PETROLEUM Petroleum Engine Unit Injector Hydraulic Pump - Remove
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System Programmable Parameters
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies DC Bus Voltage - Calibrate
C7 On-Highway Engine Fuel Injection Pump - Install
325D and 329D Excavators and 325D Material Handler Machine System Specifications Control Valve (Auxiliary) - Medium Pressure
C13 Engine Pistons and Connecting Rods - Install
C13 Engine Pistons and Connecting Rods - Remove
325D and 329D Excavators and 325D Material Handler Machine System Specifications Solenoid Valve (Work Tool, 4-Function)
3500B Industrial Engines with the ADEM 3 Electronic Control Module Diagnostic Code List
C9 On-highway Engine Turbocharger Oil Lines
C13 Engine Inlet and Exhaust Valve Springs - Remove and Install
C7 On-Highway Engine Water Pump - Remove
C7 On-Highway Engine Water Pump - Install
C7 On-Highway Engine Vibration Damper and Pulley - Remove and Install
C7 Industrial Engines Camshaft Bearings - Remove
C7 Industrial Engines Pistons and Connecting Rods - Install
C7 Industrial Engines Housing (Front) - Install
C175-16 and C175-20 Generator Set Engines Fuel Filter (Primary)
C7 PETROLEUM Petroleum Engine Crankshaft Rear Seal - Remove
C7 PETROLEUM Petroleum Engine Electronic Unit Injector Sleeve - Remove
C7 PETROLEUM Petroleum Engine Electronic Unit Injector Sleeve - Install
C7 PETROLEUM Petroleum Engine Engine Oil Pump - Disassemble
C7 Industrial Engines Engine Oil Pump - Assemble