Correction to Special Instruction, REHS0248, "Field Assembly of 854G Wheel Dozer" {7000, 7960}
- Wheel Dozer:
- 854G (S/N: AMP1-UP; A4W1-UP; 1JW1-UP)
The torque values in the following information have been updated in the Special Instruction that is referenced above.
Installation Of The Trunnion And The Adapter Plate
- Attach an eyebolt (1) and a suitable lifting device to 153-7955 Adapter Plate (2). Align the holes in the adapter plate with the holes in 153-7954 Push Beam .
Show/hide table
 | |
| Illustration 1 | g00400618 |
Installing the Adapter Plate | |
- Attach the adapter plate with fourteen 7L-9198 Bolts (3). Tighten the bolts to a torque of 900 ± 100 N·m (660 ± 60 lb ft).
- Install a suitable lifting device to 107-7523 Trunnion Assembly (4). Align the trunnion with the adapter plate.
Show/hide table
 | |
| Illustration 2 | g00400678 |
- Attach the trunnion to the adapter plate with twelve 7X-0406 Bolts (5). Tighten the bolts to a torque of 900 ± 100 N·m (660 ± 60 lb ft).
- Repeat Steps 1 through 4 for the other end of the beam.
Caterpillar Information System:
973D Track-Type Loader Engine Supplement Engine Oil Filter, Oil Filter Base and Oil Cooler - Remove and Install
854K Wheel Dozer and 992K Wheel Loader Power Train Electronic Control Module (ECM) - Flash Program
C27 and C32 Engines for Caterpillar Built Machines Switch Circuits - Test
993K Wheel Loader Power Train Electronic Control Module (ECM) - Configure
993K Wheel Loader Power Train Electronic Control Module (ECM) - Replace
993K Wheel Loader Power Train Reduced Rimpull Setting (Electronic Technician) - Adjust
993K Wheel Loader Power Train Reduced Rimpull Setting (Operator Monitor) - Adjust
Replacement of the Electrohydraulic Control Group on the 834G Wheel Dozer{5702, 5705} Replacement of the Electrohydraulic Control Group on the 834G Wheel Dozer{5702, 5705}
C27 and C32 Engines for Caterpillar Built Machines Compression Brake Solenoid Circuit - Test
C4.4 Industrial Engine Accessory Drive - Install
C4.4 Industrial Engine Accessory Drive - Assemble
C4.4 Industrial Engine Accessory Drive - Disassemble
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091} Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
973D Track-Type Loader Engine Supplement Engine - Remove
973D Track-Type Loader Engine Supplement Engine - Install
C11 and C13 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
992K Wheel Loader and 854K Wheel Dozer Power Train Duo-Cone Conventional Seals - Install
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Renewal Solenoid Circuit - Test
2008/02/11 New Three Ring Pistons are Now Used In Turbocharged 3204 <B>S/N:</B>45V Engines {1214, 1215}
C27 and C32 Engines for Caterpillar Built Machines E2089 Oil Renewal System Cannot Operate
854K Wheel Dozer Machine Systems Steering Cylinder - Remove and Install
973D Track-Type Loader Machine Systems Cab - Tilt - Full Tilt
2008/03/10 An Improved Fuel Tank Fast Fill Adapter is Now Used {1710}
C27 and C32 Engines for Caterpillar Built Machines CID 0800 FMI 14 VIMS Main Module special instruction