C27 and C32 Engines for Caterpillar Built Machines Caterpillar


E2089 Oil Renewal System Cannot Operate

Usage:

854K 221
Kondisi-kondisi yang mendorong penciptaan kode ini:

Modul Kontrol Elektronik (ECM, Electronic Control Module) engine akan menonaktifkan sistem penggantian oli jika salah satu kondisi berikut benar.

Catatan: Jika ada reset kondisi, ECM akan mengaktifkan sistem penggantian oli.

Modul VIMS mendeteksi tingkat oli engine rendah.

Modul VIMS mendeteksi tingkat bahan bakar rendah.

Modul VIMS mendeteksi tingkat tangki pengisian ulang oli engine rendah.

Catatan: E540 Tingkat Tangki Pengisian Ulang Oli Engine Rendah terdeteksi oleh modul VIMS. Kondisi tersebut diberitahukan ke ECM engine. ECM engine kemudian menetapkan E540. Kode lain yang terkait akan ditetapkan oleh modul VIMS.

Modul Kontrol Elektronik (ECM) engine akan menonaktifkan sistem penggantian oli jika kode diagnostik aktif untuk salah satu komponen berikut:

Catatan: Jika ada reset kondisi, ECM akan mengaktifkan sistem penggantian oli.

  • Sensor temperatur cairan pendingin engine

  • Sensor tekanan oli engine

  • Sensor ketinggian bahan bakar

  • Solenoid penggantian oli

ECM engine akan menonaktifkan sistem penggantian oli jika kode kejadian berikut aktif:

Catatan: Daya harus disikluskan ke ECM engine sebelum ECM dapat mengaktifkan sistem penggantian oli untuk kode ini.

  • E360 Tekanan Oli Engine Rendah

Langkah Pengujian" status="1 1. Periksa Keberadaan Kode Diagnostik atau Kode Kejadian

  1. Putar sakelar kunci ke posisi ON.

  2. Aktifkan Caterpillar Electronic Technician (ET).

  3. Periksa apakah ada kode diagnostik untuk komponen engine berikut:

    • Sensor temperatur cairan pendingin engine

    • Sensor tekanan oli engine

    • Sensor ketinggian bahan bakar

    • Solenoid penggantian oli

  4. Periksa apakah ada kode kejadian berikut:

    • E360 Tekanan Oli Engine Rendah

    • E540 Tingkat Tangki Pengisian Ulang Oli Engine Rendah

Hasil yang Diharapkan:

Ada kode diagnostik yang aktif atau kode kejadian yang aktif atau tercatat.

Hasil:

  • OK - Ada kode diagnostik yang aktif atau kode kejadian yang aktif atau tercatat.

    Perbaikan: Perbaiki setiap kode yang ada. Rujuk ke topik yang sesuai di Buku Petunjuk Pemecahan Masalah ini. Verifikasikan bahwa reparasi mengatasi masalah.

    BERHENTI

Caterpillar Information System:

2008/02/11 New Three Ring Pistons are Now Used In Turbocharged 3204 <B>S/N:</B>45V Engines {1214, 1215}
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Renewal Solenoid Circuit - Test
992K Wheel Loader and 854K Wheel Dozer Power Train Duo-Cone Conventional Seals - Install
C11 and C13 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
973D Track-Type Loader Engine Supplement Engine - Install
973D Track-Type Loader Engine Supplement Engine - Remove
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091} Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
2008/02/04 Correction to Special Instruction, REHS0248, "Field Assembly of 854G Wheel Dozer" {7000, 7960}
973D Track-Type Loader Engine Supplement Engine Oil Filter, Oil Filter Base and Oil Cooler - Remove and Install
854K Wheel Dozer and 992K Wheel Loader Power Train Electronic Control Module (ECM) - Flash Program
C27 and C32 Engines for Caterpillar Built Machines Switch Circuits - Test
993K Wheel Loader Power Train Electronic Control Module (ECM) - Configure
854K Wheel Dozer Machine Systems Steering Cylinder - Remove and Install
973D Track-Type Loader Machine Systems Cab - Tilt - Full Tilt
2008/03/10 An Improved Fuel Tank Fast Fill Adapter is Now Used {1710}
C27 and C32 Engines for Caterpillar Built Machines CID 0800 FMI 14 VIMS Main Module special instruction
C27 and C32 Engines for Caterpillar Built Machines CID 0800 FMI 09 VIMS Main Module abnormal update rate
2008/03/24 An Installation Procedure for the Caterpillar Machine Security System (MSS) Is Available {7631}
2008/03/10 New Software for Product Link is Now Available {7606, 7620}
993K Wheel Loader Power Train Connector Contact Description
2008/02/18 Correction to Systems Operation Testing and Adjusting , "Specifications (Power Train)" {3000, 3100}
AD30 Underground Articulated Truck Fuel Tank Breather - Replace
C11 and C13 Petroleum Engines Camshaft
2008/06/30 New Parts Update the Fender Groups {7252}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.