3306C Engines for Caterpillar Built Machines Caterpillar


Fuel Injection Pump Housing

Usage:

D6D 01Y



图 1g01400572

(1) 在密封的地方,用润滑油将 O 型密封圈稍加润滑。 组装定位销,距泵壳体组件的表面 0.13 mm (0.005 in)以内。

(A) 泵壳体组件驱动端与弹簧销之间的距离 ... 15.88 mm (0.625 in)

(B) 挺杆组件孔 ... 16.31 ± 0.08 mm (0.642 ± 0.003 in)

(C) 组装后衬套轴承内径 ... 25.413 ± 0.013 mm (1.0005 ± 0.0005 in)

(E) 泵壳体组件与双头螺栓之间的距离 ... 38.00 mm (1.496 in)

(F) 组装后衬套轴承内径 ... 60.325 ± 0.013 mm (2.3750 ± 0.0005 in)

注: 将弹簧销槽放在区域 (G) 中,角度 (H) 为 45 度。

Caterpillar Information System:

D11R Track-Type Tractor Power Train Torque Converter
3306C Engines for Caterpillar Built Machines Fuel Injection Pump
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Monitoring System System Schematic
D11R Track-Type Tractor Power Train Transmission and Torque Converter Pump
2007/07/30 A New Procedure for Adding the Third Valve Improves the Installation for the Shuttle Valve and Seals {5051, 5059, 5063}
C6.6 Engines For Caterpillar Built Machines Customer Specified Parameters Worksheet
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems Refrigerant Accumulator - Remove and Install
C6.6 Engines For Caterpillar Built Machines Customer Specified Parameters Table
2007/07/30 New Wiper Seals Are Now Used in the Oscillating Axle Trunnion Supports {3268, 3278}
2007/07/23 A New Sprocket Segment Improves The Retention Of The Segment {4155, 4184}
924H, 924HZ, 928HZ and 930H Wheel Loaders Power Train Parking Brake - Remove and Install
C6.6 Engines For Caterpillar Built Machines Customer Specified Parameters
D11T Track-Type Tractor Power Train Relief Valve (Torque Converter Outlet)
2010/12/08 The Main Control Valve Is Updated on Certain Wheel Tractor-Scrapers {5051, 5304}
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Monitoring System Self Test
2007/10/22 277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Monitoring System Connector Contact Description
Bench Test Procedure For A D8R Track-Type Tractor Torque Converter{3101} Bench Test Procedure For A D8R Track-Type Tractor Torque Converter{3101}
D3K, D4K and D5K Track-Type Tractors Fuel Tank Cap - Clean
2007/08/06 The Fender Group is Updated {7252}
Valve Bridges are Included with Cylinder Heads{1102, 1123} Valve Bridges are Included with Cylinder Heads{1102, 1123}
2007/07/30 Correction to Systems Operation Testing and Adjusting , "Transmission Hydraulic Control Clutch Pressure - Test" {3167}
C6.6 Engines For Caterpillar Built Machines Can Not Reach Top Engine RPM
C6.6 Engines For Caterpillar Built Machines ECM Will Not Accept Factory Passwords
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.