Connector Contact Description
For wire numbers and information on the connectors, refer to the Testing and Adjusting, "System Schematic" Section of this manual or refer to Electrical Schematic, KENR5218.
Connector of the Instrument Cluster
Show/hide table
Illustration 1 | g01402246 |
Rear view of the instrument cluster (1) + Battery (12) Left Turn Signal (13) Open (23) Open (24) Open (31) CAN+ Term (35) CAN - |
Table 1 refers to the pin numbers and the signal for each pin on the connector of the instrument cluster.
Show/hide table
Connector of the Instrument Cluster     | |
---|---|
Signal     | Pin Number     |
+ Battery     | 1     |
- Battery     | 2     |
Key Switch     | 3     |
Open     | 4     |
Open     | 5     |
Fuel Level Sender     | 6     |
Open     | 7     |
Open     | 8     |
Open     | 9     |
High Beam     | 10     |
Open     | 11     |
Left Turn Signal     | 12     |
Open     | 13     |
Open     | 14     |
Open     | 15     |
Open     | 16     |
Low Charge Indicator     | 17     |
Open     | 18     |
Right Turn Signal     | 19     |
Driver Output (Horn)     | 20     |
Backlight Input ON     | 21     |
Open     | 22     |
Open     | 23     |
Open     | 24     |
Open     | 25     |
Hydraulic Filter Restriction     | 26     |
Backlight Dimmer     | 27     |
Open     | 28     |
Open     | 29     |
Open     | 30     |
CAN+ Term     | 31     |
CAN- Term     | 32     |
CAN Shield     | 33     |
CAN+     | 34     |
CAN -     | 35     |
Caterpillar Information System:
2007/10/22 277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Monitoring System Self Test
2010/12/08 The Main Control Valve Is Updated on Certain Wheel Tractor-Scrapers {5051, 5304}
D11T Track-Type Tractor Power Train Relief Valve (Torque Converter Outlet)
3306C Engines for Caterpillar Built Machines Fuel Injection Pump Housing
D11R Track-Type Tractor Power Train Torque Converter
3306C Engines for Caterpillar Built Machines Fuel Injection Pump
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Monitoring System System Schematic
D11R Track-Type Tractor Power Train Transmission and Torque Converter Pump
2007/07/30 A New Procedure for Adding the Third Valve Improves the Installation for the Shuttle Valve and Seals {5051, 5059, 5063}
C6.6 Engines For Caterpillar Built Machines Customer Specified Parameters Worksheet
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems Refrigerant Accumulator - Remove and Install
Bench Test Procedure For A D8R Track-Type Tractor Torque Converter{3101} Bench Test Procedure For A D8R Track-Type Tractor Torque Converter{3101}
D3K, D4K and D5K Track-Type Tractors Fuel Tank Cap - Clean
2007/08/06 The Fender Group is Updated {7252}
Valve Bridges are Included with Cylinder Heads{1102, 1123} Valve Bridges are Included with Cylinder Heads{1102, 1123}
2007/07/30 Correction to Systems Operation Testing and Adjusting , "Transmission Hydraulic Control Clutch Pressure - Test" {3167}
C6.6 Engines For Caterpillar Built Machines Can Not Reach Top Engine RPM
C6.6 Engines For Caterpillar Built Machines ECM Will Not Accept Factory Passwords
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems Main Control Valve - Disassemble
924H, 924HZ, 928HZ and 930H Wheel Loaders Power Train Transmission and Torque Converter - Remove
D3K, D4K and D5K Track-Type Tractors Electrohydraulic System Hydraulic Oil Cooler
D11T Track-Type Tractor Machine Systems Case and Frame
2007/08/13 Improved Machining for the Shuttle Valves {5079}