- Caterpillar Products:
- All
Illustration 1 | g01402490 |
Caterpillar announces the 277-2362 Transmission Analyzer III Group. This tool serves as an interface between a transmission test bench and a personal computer.
The 277-2362 Transmission Analyzer III Group performs tests on the following transmissions:
- Power Shift planetary and Power Shift countershaft transmissions
- Individual clutch Modulation (ICM) transmissions
- Challenger transmissions
- H and M Series Motor Grader transmissions
- Electronic Clutch Pressure Control (ECPC) transmissions
The transmission analyzer III group performs the following tests:
- tests the proportional valves that are used to control the transmissions
- performs automatic or manual testing for shorted or open coils on all solenoids
- shifts the transmissions
- determines if the shift levers, for transmissions which are not controlled by autoshift electronic controls, are functioning correctly
The transmission analyzer III group uses PC based software for accurate control during testing. Easy to use software provides a step by step sequence for testing. The software also allows control with a mouse or by the keyboard.
The approach allows software downloads into the tool in order to add diagnostics for future transmission products. The transmission analyzer III group uses a USB cable for easy connection to the PC.
Specifications for the 277-2362 Transmission Analyzer III Group     | |
Item     | Description     |
Size     | 3 X 32 X 15 cm (1.2 X 12.6 X 5.9 inch)     |
Weight     | Group 6.2 kg (13.8 lb) Tester 4.04 kg (8.9 lb)     |
Current Requirement     | 10 Amperes, Minimum     |
AC Power     | 110 or 240 Volts     |
Operating Temperature Range     | −18 to 60 °C (−0 °F to 140 °F)     |
Storage Temperature Range     | −40 to 60 °C (−40 to 140 °F)     |
Consist of the 277-2362 Transmission Analyzer III Group     | |
Part No.     | Description     |
277-2363     | Transmission Analyzer III Group     |
131-5047     | Power Cable (AC)     |
286-0755     | USB Cable (Transmission Analyzer III Group)     |
NETG5048     | Operating Software     |
NEHS0996     | Tool Operating Manual     |
Optional Cables Required for Testing Specific Transmissions     | ||
Part No.     | Description     | Application     |
1U-9479     | Adapter Cable     | Required for Gear Shift lever Test     |
1U-9480     | Adapter Cable     | Required for Gear Shift Lever Test     |
1U-9482     | Test Cable     | ICM     |
1U-9483     | Test Cable     | Challenger     |
9U-7495     | Test Cable     | Wheel Loader Bulkhead     |
9U-7496     | Test Cable     | 12 pin to 2 pin Deutsch Connector     |
9U-7497     | Test Cable     | 12 pin to 2 pin SureSeal Connector     |
9U-7498     | Extension Cable     | Deutsch to Deutsch Extension     |
256-7623     | Test Cable     | Tractor Bulkhead - 17 pin     |
300-4993     | Adapter Cable     | 17 pin to 14 pin, Some R and T Series Track-type Tractors     |
307-3542     | Adapter Cable     | 17 pin to 14 pin D11R (7PZ, 9TR, 9XR, AAF) Track-type Tractors     |
Minimum PC Requirements     | |
Component     | Requirement     |
Processor     | Intel Pentium II, 133 MHz     |
RAM     | 128 MB     |
Hard Drive     | 4.3 GB     |
CD/DVD     | CD drive or Third Generation DVD drive     |
Pointing Device (recommended)     | Mouse, Track Ball, Touch Pad, etc.     |