C6.6 Engines For Caterpillar Built Machines Caterpillar


Customer Specified Parameters Table

Usage:

928HZ BYD

表 1
用户指定参数    
ECM 参数     可能值     默认值    
发动机额定参数    
"额定编号"     1 到 4     1    
低/高怠速参数    
"低怠速转速"     700 到 1200 rpm     830 rpm    
"高怠速转速"     1900 到 2900 rpm     2205 rpm    
ECM 识别参数    
"Equipment ID(设备 ID)"     17 位数字
可用字符取决于所用的维修工具    
未编程    
油门锁定机构参数    
"油门锁定机构功能安装状态"     已安装
未安装    
已安装    
"油门锁定增速斜率"     0 到 600 rpm/秒     50 rpm/ 秒    
"油门锁定发动机设置转速增量"     0 到 200 rpm     40 rpm    
其他    
"监控模式停机"     停用
启用    
停用    
"监控模式减额"     停用
启用    
启用    
"跛行回家所需发动机转速"     700 到 1800 rpm     1200 rpm    
J1939 持续故障处理    
"遥控扭矩速度控制启用情况"     停用
启用    
启用    
可配置输入    
"空气滤清器阻塞开关安装状态"     未安装
已安装    
已安装    
"油水分离器开关安装状态"     未安装
已安装    
已安装    
"用户定义的开关安装状态"     未安装
已安装    
未安装    

Caterpillar Information System:

2007/07/30 New Wiper Seals Are Now Used in the Oscillating Axle Trunnion Supports {3268, 3278}
2007/07/23 A New Sprocket Segment Improves The Retention Of The Segment {4155, 4184}
924H, 924HZ, 928HZ and 930H Wheel Loaders Power Train Parking Brake - Remove and Install
C6.6 Engines For Caterpillar Built Machines Customer Specified Parameters
928Hz Wheel Loader Hydraulic System General Information
2007/07/23 The Evaporator Coil that is Supplied by Parts Service has Changed {7343}
The Charging Ports For The Air Conditioner Have Been Inverted{7320} The Charging Ports For The Air Conditioner Have Been Inverted{7320}
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems Piston and Vane Pump (Steering, Implement, Pilot) - Install
2007/08/27 New AccuGrade ® is Now Available {7220, 7620}
Guideline for Unauthorized Modifications to On-Highway Engines{0685, 1000, 1000} Guideline for Unauthorized Modifications to On-Highway Engines{0685, 1000, 1000}
930H Wheel Loader Hydraulic System Pilot Oil Accumulator - Test and Charge
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Signal Resolver Network
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems Refrigerant Accumulator - Remove and Install
C6.6 Engines For Caterpillar Built Machines Customer Specified Parameters Worksheet
2007/07/30 A New Procedure for Adding the Third Valve Improves the Installation for the Shuttle Valve and Seals {5051, 5059, 5063}
D11R Track-Type Tractor Power Train Transmission and Torque Converter Pump
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Monitoring System System Schematic
3306C Engines for Caterpillar Built Machines Fuel Injection Pump
D11R Track-Type Tractor Power Train Torque Converter
3306C Engines for Caterpillar Built Machines Fuel Injection Pump Housing
D11T Track-Type Tractor Power Train Relief Valve (Torque Converter Outlet)
2010/12/08 The Main Control Valve Is Updated on Certain Wheel Tractor-Scrapers {5051, 5304}
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Monitoring System Self Test
2007/10/22 277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.