Parking Brake - Remove and Install
拆卸步骤
开始:
- 把驱动轴取下。 请参考拆解和组装, "驱动轴 - 拆卸和安装"。
- 松开停车制动器。
- 拆下螺栓 (1) 和挡圈 (2) 。
Show/hide table
 | |
| 图 1 | g00663592 |
- 拆下制动鼓 (3) 。
Show/hide table
 | |
| 图 2 | g00663600 |
- 卸下螺栓 (5) 。
Show/hide table
 | |
| 图 3 | g00891200 |
- 拆下制动器组件 (6) 。 当您拆下制动器组件 (6) 时，连杆组件 (4) 将掉落。
- 拆下弹簧 (7) 并分离制动器组件 (8) 。
Show/hide table
 | |
| 图 4 | g01401517 |
Show/hide table
 |
弹簧压缩零件如果安装不当，会伤害人体。 为避免伤害，遵照出版的装配程序，并穿上保护装备。 |
安装步骤
- 组装停车制动器 (8) 并安装弹簧 (7) 。
Show/hide table
| | |
| 图 5 | g01401517 |
Show/hide table
|
弹簧压缩零件如果安装不当，会伤害人体。 为避免伤害，遵照出版的装配程序，并穿上保护装备。 |
- 安装操纵杆组件 (4) 和制动器组件 (6) 。
Show/hide table
| | |
| 图 6 | g00891200 |
- 安装螺栓 (5) 。 将螺栓 (5) 拧紧至扭矩为 120 ± 20 N·m (89 ± 15 lb ft)。
- 安装制动鼓 (3) 。
Show/hide table
| | |
| 图 7 | g00663600 |
- 安装挡圈 (2) 和螺栓 (1) 。 将螺栓 (1) 上紧到 120 ± 20 N·m (89 ± 15 lb ft) 的扭矩。
Show/hide table
| | |
| 图 8 | g00663592 |
- 调整停车制动器。 请参阅测试和调整, "停车制动器控制 - 调整"。
End By: 安装驱动轴。 有关正确的步骤，请参阅 拆解和装配, "驱动轴 - 拆卸和安装"。
Caterpillar Information System:
C6.6 Engines For Caterpillar Built Machines Customer Specified Parameters
928Hz Wheel Loader Hydraulic System General Information
2007/07/23 The Evaporator Coil that is Supplied by Parts Service has Changed {7343}
The Charging Ports For The Air Conditioner Have Been Inverted{7320} The Charging Ports For The Air Conditioner Have Been Inverted{7320}
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems Piston and Vane Pump (Steering, Implement, Pilot) - Install
2007/08/27 New AccuGrade ® is Now Available {7220, 7620}
Guideline for Unauthorized Modifications to On-Highway Engines{0685, 1000, 1000} Guideline for Unauthorized Modifications to On-Highway Engines{0685, 1000, 1000}
930H Wheel Loader Hydraulic System Pilot Oil Accumulator - Test and Charge
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Signal Resolver Network
930H Wheel Loader Hydraulic System Ride Control System
930H Wheel Loader Hydraulic System Hydraulic Oil Cooler
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
2007/07/23 A New Sprocket Segment Improves The Retention Of The Segment {4155, 4184}
2007/07/30 New Wiper Seals Are Now Used in the Oscillating Axle Trunnion Supports {3268, 3278}
C6.6 Engines For Caterpillar Built Machines Customer Specified Parameters Table
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems Refrigerant Accumulator - Remove and Install
C6.6 Engines For Caterpillar Built Machines Customer Specified Parameters Worksheet
2007/07/30 A New Procedure for Adding the Third Valve Improves the Installation for the Shuttle Valve and Seals {5051, 5059, 5063}
D11R Track-Type Tractor Power Train Transmission and Torque Converter Pump
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Monitoring System System Schematic
3306C Engines for Caterpillar Built Machines Fuel Injection Pump
D11R Track-Type Tractor Power Train Torque Converter
3306C Engines for Caterpillar Built Machines Fuel Injection Pump Housing
D11T Track-Type Tractor Power Train Relief Valve (Torque Converter Outlet)