Piston Motor (Steering) - Install
Installation Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 138-7575 | Link Bracket | 2 |
| B | 1U-9200 | Lever Puller Hoist | 1 |
- Attach Tooling (A) and Tooling (B) to the cab. Attach Tooling (B) and a suitable lifting device to piston motor (5). The weight of piston motor (5) is approximately 32 kg (70 lb). Install the O-ring seal and install piston pump (5). Install bolts (4) .
Show/hide table
 | |
| Illustration 1 | g01264952 |
Show/hide table
 | |
| Illustration 2 | g01265135 |
- Remove Tooling (A) and Tooling (B). Install plate (3) and bolts (2) .
Show/hide table
 | |
| Illustration 3 | g01265124 |
- Connect hose assemblies (1) to the steering motor.
Show/hide table
 | |
| Illustration 4 | g00820927 |
End By: Install the counterbalance valve. Refer to Disassembly and Assembly, "Counterbalance Valve - Install".
Caterpillar Information System:
2006/04/24 Correction to Specification , "D3C, D4C and D5C Series III Hystat Track-Type Tractor Power" {4350}
D7R Series II Track-Type Tractor Machine Systems Piston Motor (Steering) - Remove
525C, 535C and 545C Wheel Skidders Power Train Transmission Pump Drive Housing - Install
525C, 535C and 545C Wheel Skidders Power Train Transmission Pump Drive Housing - Remove
D6G Series 2 Track-Type Tractor Power Train Brakes
938H Wheel Loader and IT38H Integrated Toolcarrier Steering System Secondary Steering Pump and Electric Motor
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Transmission Oil Pump
2006/05/01 Inspection and/or Repair Procedure to Replace Crankshafts on Machine Engines {1202}
938H Wheel Loader and IT38H Integrated Toolcarrier Steering System Check Valve (Secondary Steering)
D6G Series 2 Track-Type Tractor Power Train Hydraulic Control Mechanism
525C, 535C and 545C Wheel Skidders Machine Systems Hydraulic Tank - Install
525C, 535C and 545C Wheel Skidders Machine Systems Hydraulic Tank - Remove
D11T, D8T and D9T Track-Type Tractors VIMSTM 3G / Product Link Electronic Control Module (ECM) - Replace
D7R Series II Track-Type Tractor Machine Systems Piston Motor (Steering) - Disassemble
C4.4 Industrial Engine Fuel Injection
D7R Series II Track-Type Tractor Machine Systems Piston Motor (Steering) - Assemble
631G Wheel Tractor-Scraper Power Train Speed Sensor (Transmission) - Assemble
The Breather Hole In 7T-7706 Housing As Is Not Drilled To the Correct Depth{3120} The Breather Hole In 7T-7706 Housing As Is Not Drilled To the Correct Depth{3120}
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Control Manifold (Implement, Steering Pump Margin Relief)
D7G2 Track-Type Tractor Power Train Sequence Relief Valve
525C, 535C and 545C Wheel Skidders Machine Systems Piston Pump (Implement, Steering, Brake) - Disassemble
525C, 535C and 545C Wheel Skidders Machine Systems Piston Pump (Implement, Steering, Brake) - Assemble
631G and 637G Wheel Tractor-Scrapers Machine Systems Oil Filter (Hydraulic Tank) - Remove
631G and 637G Wheel Tractor-Scrapers Machine Systems Oil Filter (Hydraulic Tank) - Install