Secondary Steering Pump and Electric Motor
Show/hide table
 | |
| Illustration 1 | g01444259 |
(1) Torque for the nut ... 8.0 ± 1.5 N·m (71.0 ± 12.0 lb in)
(2) Relay
(3) Torque for the two bolts ... 9.0 ± 2.0 N·m (70.0 ± 18.0 lb in)
(4) Torque for the nut ... 20.5 ± 0.5 N·m (15.0 ± 0.5 lb ft)
(5) Torque for the relief valve ... 25.7 ± 1.3 N·m (19.0 ± 1.0 lb ft)
(6) Torque for the two nuts ... 37.0 ± 2.0 N·m (27.0 ± 1.0 lb ft)
The motor operates at 24 VDC.
Caterpillar Information System:
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Transmission Oil Pump
2006/05/01 Inspection and/or Repair Procedure to Replace Crankshafts on Machine Engines {1202}
938H Wheel Loader and IT38H Integrated Toolcarrier Steering System Check Valve (Secondary Steering)
D6G Series 2 Track-Type Tractor Power Train Hydraulic Control Mechanism
525C, 535C and 545C Wheel Skidders Machine Systems Hydraulic Tank - Install
525C, 535C and 545C Wheel Skidders Machine Systems Hydraulic Tank - Remove
2006/06/05 New Speed Timing Sensor is Available {1912}
D6G Series 2 Track-Type Tractor Power Train Steering Clutch Hydraulic Control Valve
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Temperature Sensor (Torque Converter Oil)
D7R Series II Track-Type Tractor Machine Systems Counterbalance Valve - Install
D7R Series II Track-Type Tractor Machine Systems Counterbalance Valve - Remove
525C, 535C and 545C Wheel Skidders Engine Supplement Engine Oil Pan - Remove and Install - Engine In Chassis
D6G Series 2 Track-Type Tractor Power Train Brakes
525C, 535C and 545C Wheel Skidders Power Train Transmission Pump Drive Housing - Remove
525C, 535C and 545C Wheel Skidders Power Train Transmission Pump Drive Housing - Install
D7R Series II Track-Type Tractor Machine Systems Piston Motor (Steering) - Remove
2006/04/24 Correction to Specification , "D3C, D4C and D5C Series III Hystat Track-Type Tractor Power" {4350}
D7R Series II Track-Type Tractor Machine Systems Piston Motor (Steering) - Install
D11T, D8T and D9T Track-Type Tractors VIMSTM 3G / Product Link Electronic Control Module (ECM) - Replace
D7R Series II Track-Type Tractor Machine Systems Piston Motor (Steering) - Disassemble
C4.4 Industrial Engine Fuel Injection
D7R Series II Track-Type Tractor Machine Systems Piston Motor (Steering) - Assemble
631G Wheel Tractor-Scraper Power Train Speed Sensor (Transmission) - Assemble
The Breather Hole In 7T-7706 Housing As Is Not Drilled To the Correct Depth{3120} The Breather Hole In 7T-7706 Housing As Is Not Drilled To the Correct Depth{3120}