938H Wheel Loader and IT38H Integrated Toolcarrier Steering System Caterpillar


Check Valve (Secondary Steering)

Usage:

938H JKM



Illustration 1g01444377

Cracking Pressure ... 35 kPa (5.0 psi)

Caterpillar Information System:

D6G Series 2 Track-Type Tractor Power Train Hydraulic Control Mechanism
525C, 535C and 545C Wheel Skidders Machine Systems Hydraulic Tank - Install
525C, 535C and 545C Wheel Skidders Machine Systems Hydraulic Tank - Remove
2006/06/05 New Speed Timing Sensor is Available {1912}
D6G Series 2 Track-Type Tractor Power Train Steering Clutch Hydraulic Control Valve
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Temperature Sensor (Torque Converter Oil)
D7R Series II Track-Type Tractor Machine Systems Counterbalance Valve - Install
D7R Series II Track-Type Tractor Machine Systems Counterbalance Valve - Remove
525C, 535C and 545C Wheel Skidders Engine Supplement Engine Oil Pan - Remove and Install - Engine In Chassis
980H Wheel Loader Electrohydraulic System Hood Tilt System
C9.3 Engines for Caterpillar Built Machines Speed/Timing Sensor - Remove and Install
980H Wheel Loader Electrohydraulic System Hood Tilt System Air - Purge
2006/05/01 Inspection and/or Repair Procedure to Replace Crankshafts on Machine Engines {1202}
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Transmission Oil Pump
938H Wheel Loader and IT38H Integrated Toolcarrier Steering System Secondary Steering Pump and Electric Motor
D6G Series 2 Track-Type Tractor Power Train Brakes
525C, 535C and 545C Wheel Skidders Power Train Transmission Pump Drive Housing - Remove
525C, 535C and 545C Wheel Skidders Power Train Transmission Pump Drive Housing - Install
D7R Series II Track-Type Tractor Machine Systems Piston Motor (Steering) - Remove
2006/04/24 Correction to Specification , "D3C, D4C and D5C Series III Hystat Track-Type Tractor Power" {4350}
D7R Series II Track-Type Tractor Machine Systems Piston Motor (Steering) - Install
D11T, D8T and D9T Track-Type Tractors VIMSTM 3G / Product Link Electronic Control Module (ECM) - Replace
D7R Series II Track-Type Tractor Machine Systems Piston Motor (Steering) - Disassemble
C4.4 Industrial Engine Fuel Injection
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.