Piston Motor (Steering) - Disassemble
Disassembly Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 1P-1861     | Retaining Ring Pliers     | 1     |
B     | 126-7175     | Push-Puller Tool Gp     | 1     |
1U-6343 | Threaded Rod     | 1     | |
6V-8149 | Nut     | 2     | |
5P-8245 | Hard Washer     | 1     | |
C     | 1P-1860     | Retaining Ring Pliers     | 1     |
D     | 1P-1860     | Bearing Puller     | 1     |
Start By:
- Remove the steering motor. Refer to Disassembly and Assembly, "Piston Motor (Steering) - Remove".
- Mark the head and the housing for proper alignment during reassembly. Remove bolts (2) from housing (1). Remove head (3) .
Show/hide table
Illustration 1 | g00740130 |
- Remove O-ring seal (4) and plate (5) .
Show/hide table
Illustration 2 | g00835383 |
- Use Tooling (A) in order to remove retaining ring (6) .
Show/hide table
Illustration 3 | g00835389 |
- Protect the shaft and remove cover (7). Remove seal (8) from the cover.
Show/hide table
Illustration 4 | g00835392 |
- Remove O-ring seal (9) and shims (10) .
Show/hide table
Illustration 5 | g00835396 |
- Use Tooling (B) to remove rotating group (11) from the housing. Do not allow the barrel to separate from the pistons during the removal procedure.
Show/hide table
Illustration 6 | g00835416 |
- Remove barrel (12) from the pistons.
Show/hide table
Illustration 7 | g00835428 |
- Remove spring (13) and shim (14) from barrel (12) .
Show/hide table
Illustration 8 | g00835431 |
- Remove screws (15) from the shaft. Remove plate (16) and the pistons from the shaft.
Show/hide table
Illustration 9 | g00835572 |
- Remove pin (17) and pistons (18) from plate (16). The piston rings are nonserviceable separately from the pistons.
Show/hide table
Illustration 10 | g00835632 |
- Use Tooling (C) to remove retaining ring (19) from shaft (20) .
Show/hide table
Illustration 11 | g00836012 |
- Use Tooling (D) and a suitable press in order to remove bearings (21) from shaft (20) .
Show/hide table
Illustration 12 | g00836018 |
Caterpillar Information System:
D11T, D8T and D9T Track-Type Tractors VIMSTM 3G / Product Link Electronic Control Module (ECM) - Replace
D7R Series II Track-Type Tractor Machine Systems Piston Motor (Steering) - Install
2006/04/24 Correction to Specification , "D3C, D4C and D5C Series III Hystat Track-Type Tractor Power" {4350}
D7R Series II Track-Type Tractor Machine Systems Piston Motor (Steering) - Remove
525C, 535C and 545C Wheel Skidders Power Train Transmission Pump Drive Housing - Install
525C, 535C and 545C Wheel Skidders Power Train Transmission Pump Drive Housing - Remove
D6G Series 2 Track-Type Tractor Power Train Brakes
938H Wheel Loader and IT38H Integrated Toolcarrier Steering System Secondary Steering Pump and Electric Motor
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Transmission Oil Pump
2006/05/01 Inspection and/or Repair Procedure to Replace Crankshafts on Machine Engines {1202}
938H Wheel Loader and IT38H Integrated Toolcarrier Steering System Check Valve (Secondary Steering)
D6G Series 2 Track-Type Tractor Power Train Hydraulic Control Mechanism
C4.4 Industrial Engine Fuel Injection
D7R Series II Track-Type Tractor Machine Systems Piston Motor (Steering) - Assemble
631G Wheel Tractor-Scraper Power Train Speed Sensor (Transmission) - Assemble
The Breather Hole In 7T-7706 Housing As Is Not Drilled To the Correct Depth{3120} The Breather Hole In 7T-7706 Housing As Is Not Drilled To the Correct Depth{3120}
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Control Manifold (Implement, Steering Pump Margin Relief)
D7G2 Track-Type Tractor Power Train Sequence Relief Valve
525C, 535C and 545C Wheel Skidders Machine Systems Piston Pump (Implement, Steering, Brake) - Disassemble
525C, 535C and 545C Wheel Skidders Machine Systems Piston Pump (Implement, Steering, Brake) - Assemble
631G and 637G Wheel Tractor-Scrapers Machine Systems Oil Filter (Hydraulic Tank) - Remove
631G and 637G Wheel Tractor-Scrapers Machine Systems Oil Filter (Hydraulic Tank) - Install
631G and 637G Wheel Tractor-Scrapers Machine Systems Oil Filter (Hydraulic Tank) - Disassemble
631G and 637G Wheel Tractor-Scrapers Machine Systems Oil Filter (Hydraulic Tank) - Assemble