325D and 329D Excavators and 325D Material Handler Machine System Specifications Caterpillar


Bucket Adjuster

Usage:

325D L A3R



图 1g01524829

(A) 调整间隙 ... 0.5 至 1.0 mm (0.02 至 0.04 in)

注: 至少使用 3 片 087-5975 垫片 。

(1) 根据需要,使用下面的垫片:

087-5975 垫片
数量 ... 4
1 只垫片厚度 ... 0.5 mm (0.02 in)
087-5976 垫片
数量 ... 6
1 只垫片厚度 ... 1.0 mm (0.04 in)

Caterpillar Information System:

C27 and C32 Generator Set Engines Engine Oil Filter Base
3512 Industrial Engine Exhaust Manifold
345D, 349D and 349D2 Excavator Machine System Specifications Fasteners
2005/12/19 New Piston and Rod Group {1225}
CX31 On-Highway Transmission Torque Converter Housing
C7 Urban Transit Bus Engines Reference Material
C13 and C15 On-highway Engines Intake Manifold Air Pressure Is Low
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Bucket Linkage Bearings and Seals - Install
C175 Generator Set Engines Engine Oil Pan - Remove
3512B Oil Well Servicing Engine (ADEM III) Fuel Position Multiplier
3512C Petroleum Engines Override Switch
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Programmable Parameters
3512C Petroleum Engines Diagnostic Code List
3512C Petroleum Engines Event Code List
C7 On-highway Engine Belt Tensioner
C175 Generator Set Engines Engine Oil Pan - Disassemble
C13 On-highway Engine Clean Gas Induction Cooler
3500 Locomotive Engines Crankcase Pressure
3512 Industrial Engine Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
Petroleum Base Upgrade Installation{7060} Petroleum Base Upgrade Installation{7060}
C27 and C32 Engines for Caterpillar Built Machines CID 0261 FMI 11 Engine Timing Offset fault
C11 and C13 Engines for Caterpillar Built Machines Injector Solenoid Circuit - Test
C175 Generator Set Engines Engine Oil Pan - Assemble
3512C Engine for Caterpillar Built Machines System Configuration Parameters
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.