Engine Oil Pan - Disassemble
拆解步骤
开始:
- 拆下发动机机油滤网。 请参阅拆解和组装, "发动机机油滤网 - 拆卸和安装"。
- 拆下发动机油底壳。 请参阅拆解和组装, "发动机油底壳 - 拆卸"。
- 拆下螺栓 (2) 和螺栓 (3) 。 拆下弯头 (1) 。
Show/hide table
 | |
| 图 1 | g01215260 |
- 拆下螺栓 (4) 和螺栓 (5) 。 拆卸发动机机油滤网壳体 (6) 。
Show/hide table
 | |
| 图 2 | g01215581 |
Caterpillar Information System:
C7 On-highway Engine Belt Tensioner
3512C Petroleum Engines Event Code List
3512C Petroleum Engines Diagnostic Code List
325D and 329D Excavators and 325D Material Handler Machine System Specifications Bucket Adjuster
C27 and C32 Generator Set Engines Engine Oil Filter Base
3512 Industrial Engine Exhaust Manifold
345D, 349D and 349D2 Excavator Machine System Specifications Fasteners
2005/12/19 New Piston and Rod Group {1225}
CX31 On-Highway Transmission Torque Converter Housing
C7 Urban Transit Bus Engines Reference Material
C13 and C15 On-highway Engines Intake Manifold Air Pressure Is Low
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Bucket Linkage Bearings and Seals - Install
C13 On-highway Engine Clean Gas Induction Cooler
3500 Locomotive Engines Crankcase Pressure
3512 Industrial Engine Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
Petroleum Base Upgrade Installation{7060} Petroleum Base Upgrade Installation{7060}
C27 and C32 Engines for Caterpillar Built Machines CID 0261 FMI 11 Engine Timing Offset fault
C11 and C13 Engines for Caterpillar Built Machines Injector Solenoid Circuit - Test
C175 Generator Set Engines Engine Oil Pan - Assemble
3512C Engine for Caterpillar Built Machines System Configuration Parameters
3512B Oil Well Servicing Engine (ADEM III) Customer Parameters Worksheet
C11 and C13 Engines Turbocharger
3500 Engines Can Not Reach Top Engine RPM
2005/11/01 The Maximum Temperature for Heating the Crankshaft Gear for Installation has Changed {1202, 1204}