Engine Oil Filter Base
Show/hide table
| 图 1 | g02582244 |
Show/hide table
| 264-1492 发动机机油滤清器总成 的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 2 | 4N-8150 弹簧 | 在试验力下的长度为 55.24 mm (2.175 in)。 试验力为 75.619 ± 5.800 N (17.000 ± 1.304 lb)。 试验后的自由长度为 93.726 mm (3.6900 in)。 |
| 2 | 2 | 2P-4304 空心螺柱 | 在空心螺柱锥形端涂覆红色 Loctite 271 的长度为 7.6 mm (0.30 in)。 拧紧至扭矩为 81 ± 14 N·m (60 ± 10 lb ft)。 |
Caterpillar Information System:
3512 Industrial Engine Exhaust Manifold
345D, 349D and 349D2 Excavator Machine System Specifications Fasteners
2005/12/19 New Piston and Rod Group {1225}
CX31 On-Highway Transmission Torque Converter Housing
C7 Urban Transit Bus Engines Reference Material
C13 and C15 On-highway Engines Intake Manifold Air Pressure Is Low
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Bucket Linkage Bearings and Seals - Install
C175 Generator Set Engines Engine Oil Pan - Remove
3512B Oil Well Servicing Engine (ADEM III) Fuel Position Multiplier
3512C Petroleum Engines Override Switch
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Programmable Parameters
C7 On-highway Engine Solenoid Valve
325D and 329D Excavators and 325D Material Handler Machine System Specifications Bucket Adjuster
3512C Petroleum Engines Diagnostic Code List
3512C Petroleum Engines Event Code List
C7 On-highway Engine Belt Tensioner
C175 Generator Set Engines Engine Oil Pan - Disassemble
C13 On-highway Engine Clean Gas Induction Cooler
3500 Locomotive Engines Crankcase Pressure
3512 Industrial Engine Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
Petroleum Base Upgrade Installation{7060} Petroleum Base Upgrade Installation{7060}
C27 and C32 Engines for Caterpillar Built Machines CID 0261 FMI 11 Engine Timing Offset fault
C11 and C13 Engines for Caterpillar Built Machines Injector Solenoid Circuit - Test
C175 Generator Set Engines Engine Oil Pan - Assemble