CX31 On-Highway Transmission Caterpillar

Torque Converter Housing

Usage:

CX31 B3X

Show/hide table




Illustration 1	g03375459
Typical example

Show/hide table

Table 1
Specification for 362-8449 Torque Converter Housing Gp and 418-7982 Torque Converter Housing Gp
Item	Qty	part	Specification Description
1	3	8T-4194 Bolt	Torque to 100 ± 20 N·m (74 ± 15 lb ft).
2	10	8T-4184 Bolt	Torque to 100 ± 20 N·m (74 ± 15 lb ft).
3	7	6V-5684 Bolt	Torque to 100 ± 20 N·m (74 ± 15 lb ft).
4	8	172-9966 Bolt	Torque to 100 ± 20 N·m (74 ± 15 lb ft).
5	1	4H-6112 Breather	Torque to 35 ± 3 N·m (26 ± 2 lb ft).
6	1	363-2112 Lip Type Seal	Install the sealing lip of the lip type seal dry. Lubricate the outer diameter when pressing into the housing. ⁽¹⁾
7	1	274-6111 Bearing Race	Apply green Loctite 609 to the bearing race.
8	5	172-9966 Bolt	Use the following procedure in order to tighten the bolt: 1. Tighten the bolt to 60 ± 5 N·m (44 ± 4 lb ft). 2. Again, turn the bolt to an additional angle of 30 ± 3 degrees.
9	1	6V-5843 Bolt	Torque to 55 ± 10 N·m (41 ± 7 lb ft).
10	2	5P-8347 Bolt	Torque to 28 ± 7 N·m (248 ± 62 lb in).

Show/hide table

^( 1 )

For the (S/N: HTC1-UP) machines and for the (S/N: D9F650-UP) machines, do not lubricate the seal. For both of these models, appropriate to lubricate the outer diameter when pressing into the housing.