Exhaust Manifold
Show/hide table
 | |
| Illustration 1 | g01214846 |
(1) Bolt
-
Apply 5P-3931 Anti-Seize Compound to the nuts and bolts.
- Torque ... 135 ± 20 N·m (100 ± 15 lb ft)
(2) Bolt
-
Apply 5P-3931 Anti-Seize Compound to the nuts and bolts.
- Torque ... 45 ± 7 N·m (33 ± 5 lb ft)
(3) Bolt
-
Apply 5P-3931 Anti-Seize Compound to the nuts and bolts.
- Torque ... 65 ± 5 N·m (48 ± 4 lb ft)
Caterpillar Information System:
345D, 349D and 349D2 Excavator Machine System Specifications Fasteners
2005/12/19 New Piston and Rod Group {1225}
CX31 On-Highway Transmission Torque Converter Housing
C7 Urban Transit Bus Engines Reference Material
C13 and C15 On-highway Engines Intake Manifold Air Pressure Is Low
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Bucket Linkage Bearings and Seals - Install
C175 Generator Set Engines Engine Oil Pan - Remove
3512B Oil Well Servicing Engine (ADEM III) Fuel Position Multiplier
3512C Petroleum Engines Override Switch
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Programmable Parameters
C7 On-highway Engine Solenoid Valve
TH35 Well Servicing Transmissions Transmission and Torque Converter - Connect
C27 and C32 Generator Set Engines Engine Oil Filter Base
325D and 329D Excavators and 325D Material Handler Machine System Specifications Bucket Adjuster
3512C Petroleum Engines Diagnostic Code List
3512C Petroleum Engines Event Code List
C7 On-highway Engine Belt Tensioner
C175 Generator Set Engines Engine Oil Pan - Disassemble
C13 On-highway Engine Clean Gas Induction Cooler
3500 Locomotive Engines Crankcase Pressure
3512 Industrial Engine Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
Petroleum Base Upgrade Installation{7060} Petroleum Base Upgrade Installation{7060}
C27 and C32 Engines for Caterpillar Built Machines CID 0261 FMI 11 Engine Timing Offset fault
C11 and C13 Engines for Caterpillar Built Machines Injector Solenoid Circuit - Test