345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Caterpillar


Shuttle Valve (Counterweight Circuit) - Install

Usage:

345C BWY

安装步骤

表 1
所需工具    
工具     零件号     零件说明     数量    
A     FT-2674     真空舱     1    



    图 1g01204281

  1. 安装梭阀 (2) 。 连接软管组件 (1) 。

  1. 关闭机器右后侧的检修门。



    图 2g01204278

  1. 从液压油箱上卸下工具 (A) 。

Caterpillar Information System:

C13, C15, and C18 Tier 4 Final Engines Flywheel Housing
3412 Generator Set Engines Flywheel
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Shuttle Valve (Counterweight Circuit) - Assemble
3412 Generator Set Engines Flywheel
3406C Engines for Caterpillar Built Machines Flywheel Housing
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Shuttle Valve (Counterweight Circuit) - Disassemble
3406C Engines for Caterpillar Built Machines Flywheel Housing
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Counterweight Circuit) - Assemble
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Load Control Valve (Boom Cylinder) - Install
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
C9 Generator Set Engines Sensors and Electrical Connectors
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Counterweight Circuit) - Disassemble
3500B and 3500C Generator Set Engines E552 Low Aftercooler Coolant Level
3500B and 3500C Generator Set Engines Coolant Level Sensor
C32 Petroleum Engines Housing (Front) - Install
315D, 318D and 319D Excavators Machine Systems Auxiliary Pilot Valve (Straight Travel) - Disassemble
C27 and C32 Generator Set Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Boom - Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Window Wiper Motor - Remove and Install - Upper
315D, 318D and 319D Excavators Machine Systems Auxiliary Pilot Valve (Straight Travel) - Assemble
C175-16 and C175-20 Engines for Caterpillar Built Machines Valve Lifter - Disassemble
C32 Petroleum Engines Valve Mechanism Cover - Remove and Install
3508 EUI Engine for D11N and D11R Track-Type Tractors Installation and Removal of the Speed/Timing Sensor
C1.5 and C2.2 Generator Set Engines Radiator - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.