C32 Petroleum Engines Caterpillar


Valve Mechanism Cover - Remove and Install

Usage:

C32 B2C

Removal Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g01204435

  1. Remove bolts (1) and valve mechanism covers (2).

Installation Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.


  1. Replace the valve cover seals, if necessary.


    Illustration 2g01204435

  2. Position valve mechanism covers (2) on the valve mechanism cover base. Install bolts (1).

Caterpillar Information System:

C175-16 and C175-20 Engines for Caterpillar Built Machines Valve Lifter - Disassemble
315D, 318D and 319D Excavators Machine Systems Auxiliary Pilot Valve (Straight Travel) - Assemble
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Window Wiper Motor - Remove and Install - Upper
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Boom - Install
C27 and C32 Generator Set Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test
315D, 318D and 319D Excavators Machine Systems Auxiliary Pilot Valve (Straight Travel) - Disassemble
C32 Petroleum Engines Housing (Front) - Install
3500B and 3500C Generator Set Engines Coolant Level Sensor
3500B and 3500C Generator Set Engines E552 Low Aftercooler Coolant Level
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Shuttle Valve (Counterweight Circuit) - Install
C13, C15, and C18 Tier 4 Final Engines Flywheel Housing
3412 Generator Set Engines Flywheel
3508 EUI Engine for D11N and D11R Track-Type Tractors Installation and Removal of the Speed/Timing Sensor
C1.5 and C2.2 Generator Set Engines Radiator - Remove and Install
C175-16 and C175-20 Engines for Caterpillar Built Machines Valve Lifter - Assemble
Reuse and Salvage for 3000 Engine Series Cylinder Blocks {1201} Reuse and Salvage for 3000 Engine Series Cylinder Blocks {1201}
3412 Generator Set Engines Fuel Shutoff Solenoid
C27 and C32 Generator Set Engines Engine Pressure Sensor Open or Short Circuit - Test
315D, 318D and 319D Excavators Machine Systems Auxiliary Pilot Valve (Straight Travel) - Install
C27 and C32 Generator Set Engines Engine Temperature Sensor Open or Short Circuit - Test
C32 Petroleum Engines Cylinder Head - Remove
Bench Test Procedure for TH48FT - E80 Oil Field Transmission{3030, 3073, 3101} Bench Test Procedure for TH48FT - E80 Oil Field Transmission{3030, 3073, 3101}
C9 Generator Set Engines Diagnostic Code Cross Reference
C175 Generator Set Engines Vibration Damper - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.