Window Wiper Motor - Remove and Install - Upper
拆卸步骤
注: 雨刮器马达必须处于 OFF(关闭)位置。
- 拆下盖 (1) 。 拆下螺栓 (2) 和杯 (3) 。
Show/hide table
图 1 | g01207837 |
- 拆下螺钉 (4) 和螺栓 (5) 。 将盖 (6) 重新安置到侧面。
Show/hide table
图 2 | g01207838 |
- 拆下螺栓 (7) 和盖组件 (8) 。
Show/hide table
图 3 | g01207842 |
- 拆下连杆 (9) 。 将地板垫 (10) 重新安置到侧面。
Show/hide table
图 4 | g01207848 |
- 拆下螺栓 (12) 和盖 (11) 。
Show/hide table
图 5 | g01207860 |
- 拆下连杆机构 (15) 。 拆下螺母 (13) 和螺栓 (14) 。 断开线束组件 (17) 。 拆下挡风玻璃雨刮器马达 (16) 。
Show/hide table
图 6 | g01207861 |
安装步骤
- 安置挡风玻璃雨刮器马达 (16) 。 连接线束组件 (17) 。 安装螺母 (13) 和螺栓 (14) 。 安装连杆机构 (15) 以使连杆 (9) 的球形接头(未显示)位于螺母正上方。
注: 雨刮器马达必须处于 OFF(关闭)位置。
Show/hide table
图 7 | g01207861 |
- 安置盖 (11) 并安装螺栓 (12) 。
Show/hide table
图 8 | g01207860 |
- 安装连杆 (9) 。 安置地板垫 (10) 。
Show/hide table
图 9 | g01207848 |
- 安置盖组件 (8) 并安装螺栓 (7) 。
Show/hide table
图 10 | g01207842 |
- 将盖 (6) 安置到侧面。 安装螺钉 (4) 和螺栓 (5) 。
Show/hide table
图 11 | g01207838 |
- 安装杯 (3) 和螺栓 (2) 。 安装盖 (1) 。
Show/hide table
图 12 | g01207837 |
Caterpillar Information System:
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Boom - Install
C27 and C32 Generator Set Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test
315D, 318D and 319D Excavators Machine Systems Auxiliary Pilot Valve (Straight Travel) - Disassemble
C32 Petroleum Engines Housing (Front) - Install
3500B and 3500C Generator Set Engines Coolant Level Sensor
3500B and 3500C Generator Set Engines E552 Low Aftercooler Coolant Level
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Shuttle Valve (Counterweight Circuit) - Install
C13, C15, and C18 Tier 4 Final Engines Flywheel Housing
3412 Generator Set Engines Flywheel
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Shuttle Valve (Counterweight Circuit) - Assemble
3412 Generator Set Engines Flywheel
3406C Engines for Caterpillar Built Machines Flywheel Housing
315D, 318D and 319D Excavators Machine Systems Auxiliary Pilot Valve (Straight Travel) - Assemble
C175-16 and C175-20 Engines for Caterpillar Built Machines Valve Lifter - Disassemble
C32 Petroleum Engines Valve Mechanism Cover - Remove and Install
3508 EUI Engine for D11N and D11R Track-Type Tractors Installation and Removal of the Speed/Timing Sensor
C1.5 and C2.2 Generator Set Engines Radiator - Remove and Install
C175-16 and C175-20 Engines for Caterpillar Built Machines Valve Lifter - Assemble
Reuse and Salvage for 3000 Engine Series Cylinder Blocks {1201} Reuse and Salvage for 3000 Engine Series Cylinder Blocks {1201}
3412 Generator Set Engines Fuel Shutoff Solenoid
C27 and C32 Generator Set Engines Engine Pressure Sensor Open or Short Circuit - Test
315D, 318D and 319D Excavators Machine Systems Auxiliary Pilot Valve (Straight Travel) - Install
C27 and C32 Generator Set Engines Engine Temperature Sensor Open or Short Circuit - Test
C32 Petroleum Engines Cylinder Head - Remove