Flywheel
Show/hide table
 | |
| Illustration 1 | g00361392 |
Note: Refer to the Systems Operation/Testing and Adjusting for the correct method for flywheel runout and flywheel inspection.
(1) Put 4C-5593 Anti-Seize Compound on the 12 Point Head bolt threads before assembly. Tighten the bolts to the following torque. ... 360 ± 25 N·m (265 ± 18 lb ft)
Note: Do not use a torch to install the gear onto the flywheel.
(2) The maximum permissible temperature of the gear for installation on the flywheel is the following value. ... 320 °C (610 °F)
Caterpillar Information System:
3406C Engines for Caterpillar Built Machines Flywheel Housing
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Shuttle Valve (Counterweight Circuit) - Disassemble
3406C Engines for Caterpillar Built Machines Flywheel Housing
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Counterweight Circuit) - Assemble
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Load Control Valve (Boom Cylinder) - Install
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
C9 Generator Set Engines Sensors and Electrical Connectors
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Counterweight Circuit) - Disassemble
C32 Petroleum Engines Housing (Front) - Remove
C175-16 and C175-20 Engines for Caterpillar Built Machines Valve Lifter - Install
C27 and C32 Generator Set Engines Sensors and Electrical Connectors
C32 Petroleum Engines Crankshaft Front Seal - Remove
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Shuttle Valve (Counterweight Circuit) - Assemble
3412 Generator Set Engines Flywheel
C13, C15, and C18 Tier 4 Final Engines Flywheel Housing
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Shuttle Valve (Counterweight Circuit) - Install
3500B and 3500C Generator Set Engines E552 Low Aftercooler Coolant Level
3500B and 3500C Generator Set Engines Coolant Level Sensor
C32 Petroleum Engines Housing (Front) - Install
315D, 318D and 319D Excavators Machine Systems Auxiliary Pilot Valve (Straight Travel) - Disassemble
C27 and C32 Generator Set Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Boom - Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Window Wiper Motor - Remove and Install - Upper
315D, 318D and 319D Excavators Machine Systems Auxiliary Pilot Valve (Straight Travel) - Assemble