Flywheel Housing
Show/hide table
| |
| 图 1 | g02726780 |
Show/hide table
| |
| 图 2 | g02638996 |
Show/hide table
| 171-3809 飞轮壳总成技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 组装期间，飞轮壳前表面和缸体后表面不得有以下物质：机油、燃油、水、密封垫粘合剂、装配固定胶和任何其他异物。 涂覆 Ultra Blue Loctite 587，以密封缸体、飞轮壳和油底壳接头之间的接合处。 | |||
| 1 | 5 | 165-3931 螺栓 | 按照下列步骤拧紧飞轮壳的螺栓：
1. 将螺栓 1 至螺栓 9 按图 2 中所示的数字顺序拧紧至 2. 将螺栓 10 至螺栓 24 按图 2 中所示的数字顺序拧紧至 3. 将螺栓 1 至螺栓 9 再次按图 2 中所示的数字顺序拧紧至 4. 将螺栓 10 至螺栓 24 再次按图 2 中所示的数字顺序拧紧至 |
| 2 | 8 | 165-3929 螺栓 | |
| 3 | 2 | 165-3934 螺栓 | |
| 4 | 9 | 5J-5793 螺栓 | |
| 5 | 1 | 7X-7731 管塞 | 组装后，管塞不得突出到表面以上。 |
| 6 | 3 | 5F-0304 螺塞 | 拧紧至扭矩为 |
Caterpillar Information System:
C9 Generator Set Engines Sensors and Electrical Connectors
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Counterweight Circuit) - Disassemble
C32 Petroleum Engines Housing (Front) - Remove
C175-16 and C175-20 Engines for Caterpillar Built Machines Valve Lifter - Install
C27 and C32 Generator Set Engines Sensors and Electrical Connectors
C32 Petroleum Engines Crankshaft Front Seal - Remove
3412 Generator Set Engines Exhaust Manifold
3500 Generator Set Engines Ether Control System
3412 Generator Set Engines Aftercooler
3412 Generator Set Engines Air Inlet and Exhaust Lines
G3300 Engines Maintenance Records
C32 Petroleum Engines Vibration Damper and Pulley - Remove and Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Load Control Valve (Boom Cylinder) - Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Counterweight Circuit) - Assemble
3406C Engines for Caterpillar Built Machines Flywheel Housing
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Shuttle Valve (Counterweight Circuit) - Disassemble
3406C Engines for Caterpillar Built Machines Flywheel Housing
3412 Generator Set Engines Flywheel
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Shuttle Valve (Counterweight Circuit) - Assemble
3412 Generator Set Engines Flywheel
C13, C15, and C18 Tier 4 Final Engines Flywheel Housing
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Shuttle Valve (Counterweight Circuit) - Install
3500B and 3500C Generator Set Engines E552 Low Aftercooler Coolant Level
3500B and 3500C Generator Set Engines Coolant Level Sensor