A Stiffener Plate is Now Used to Strengthen the Dash Panel {7451}
- Underground Articulated Truck:
- AD30 (S/N: CXR1-UP)
- AD55 (S/N: ANW1-UP; DNW1-UP)
Description of Change: A stiffener plate is now used to strengthen the dash panel. The addition of the plate will improve the durability of the dash panel. The plate is located behind the parking brake switch.
Adaptable To: The 6EL6430 Plate is effective with (S/N: CXR128-UP) and (S/N: DNW526-UP). The 6EL6430 Plate is adaptable to (S/N: CXR1-127), (S/N: ANW1-UP) and (S/N: DNW1-525).
Show/hide table
| Parts Required in Order to Install the Stiffener Plate | ||
| Quantity | Part Number | Description |
| 1 | 6EL6430 | Plate |
| 1 | 127-2170 | Screw (1) |
| 1 | 7X-0579 | Washer (1) |
| 1 | 5C-7261 | Nut (1) |
Show/hide table
| ( 1 ) | Part is only required if the dash panel is not equipped with a wiper switch. Refer to Illustration 1. |
- Turn the battery disconnect switch to the OFF position.
- Remove dash panel (1) to gain access to the rear of the dash panel.
Show/hide table
 | |
| Illustration 1 | g01109549 |
Typical view of the instrument panel (1) Dash panel (2) Wiper switch (3) Parking brake switch | |
- Install 6EL6430 Plate (4) to dash panel (1) between parking brake switch (3) and wiper switch (2) .
Show/hide table
 | |
| Illustration 2 | g01109552 |
Note: If dash panel (1) is not equipped with a wiper switch use the screw, washer and nut listed in Table 1 to secure 6EL6430 Plate (4) .
- Install dash panel (1) removed in Step 2.
Caterpillar Information System:
AD30 Underground Articulated Truck Machine Systems Fuel Tank - Install
AD30 Underground Articulated Truck Machine Systems Fuel Tank - Remove
AccuGrade® (GPS) Light Bar Scale - Set
AccuGrade® (GPS) GPS Accuracy Mode - Set
AccuGrade GPS System Vertical Guidance Method - Set
AccuGrade GPS System Blade Wear - Set
AccuGrade® (GPS) Configuration
AccuGrade GPS System Automatic Control System
AccuGrade® (GPS) Sloping Surface Design
AccuGrade® (GPS) Level Surface Design
980H Wheel Loader Machine Systems Piston Pump (Hydraulic Fan) - Assemble
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train Differential Pinion Preload - Adjust
980H Wheel Loader Power Train Output Transfer Gears - Assemble
D9T Track-Type Tractor Engine Supplement Muffler - Remove and Install
2004/09/27 Correction to Testing and Adjusting , "Relief Valve (Pump Backup)-Test and Adjust" {4322}
D10T Track-Type Tractor Power Train Track Adjuster - Install
3306C Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
D10T2 Track-Type Tractor Power Train Chrome Bearing - Remove and Install
2005/08/22 A New Idler Assembly is Now Available {1358}
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train Torque Converter Stall - Test
D8T Track-Type Tractor Machine Systems Hydraulic Tank - Assemble
SystemOne Track Guiding Arrangements {4170, 4177} SystemOne Track Guiding Arrangements {4170, 4177}
Supplemental Parts Information for the USN Seabee 924G Wheel Loader{0374, 7000} Supplemental Parts Information for the USN Seabee 924G Wheel Loader{0374, 7000}
D8T, D9T, D10T and D11T Track-Type Tractors MID 082 - CID 0874 - FMI 03