2004/09/27 Caterpillar


Correction to Testing and Adjusting , "Relief Valve (Pump Backup)-Test and Adjust" {4322}

Usage:

980G II AWH
Wheel Loader:
980G Series II (S/N: AXG1-UP; AWH1-UP; AYT1-UP)
Testing and Adjusting, RENR6012, "980G Wheel Loader Series II ", "Relief Valve (Pump Backup)-Test and Adjust". This module is part of Service Manual, RENR6000 for the 980G Series II Wheel Loader.

A portion of the existing information is incorrect. Replace Step 3 with the following information.




Illustration 1g01108269

  1. Attach a 0 to 40000 kPa (0 to 5800 psi) pressure gauge to pressure tap (2). Pressure tap (2) is located on the steering pump.

Caterpillar Information System:

D9T Track-Type Tractor Engine Supplement Muffler - Remove and Install
980H Wheel Loader Power Train Output Transfer Gears - Assemble
2004/10/18 A Stiffener Plate is Now Used to Strengthen the Dash Panel {7451}
AD30 Underground Articulated Truck Machine Systems Fuel Tank - Install
AD30 Underground Articulated Truck Machine Systems Fuel Tank - Remove
AccuGrade® (GPS) Light Bar Scale - Set
AccuGrade® (GPS) GPS Accuracy Mode - Set
AccuGrade GPS System Vertical Guidance Method - Set
AccuGrade GPS System Blade Wear - Set
AccuGrade® (GPS) Configuration
AccuGrade GPS System Automatic Control System
AccuGrade® (GPS) Sloping Surface Design
D10T Track-Type Tractor Power Train Track Adjuster - Install
3306C Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
D10T2 Track-Type Tractor Power Train Chrome Bearing - Remove and Install
2005/08/22 A New Idler Assembly is Now Available {1358}
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train Torque Converter Stall - Test
D8T Track-Type Tractor Machine Systems Hydraulic Tank - Assemble
SystemOne Track Guiding Arrangements {4170, 4177} SystemOne Track Guiding Arrangements {4170, 4177}
Supplemental Parts Information for the USN Seabee 924G Wheel Loader{0374, 7000} Supplemental Parts Information for the USN Seabee 924G Wheel Loader{0374, 7000}
D8T, D9T, D10T and D11T Track-Type Tractors MID 082 - CID 0874 - FMI 03
D8T, D9T, D10T and D11T Track-Type Tractors MID 082 - CID 0874 - FMI 04
D8T, D9T, D10T and D11T Track-Type Tractors MID 082 - CID 0875 - FMI 03
D8T, D9T, D10T and D11T Track-Type Tractors MID 082 - CID 0875 - FMI 04
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.