Wheel, Wheel Bearings and Duo-Cone Seals (Tractor) - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7573     | Link Bracket     | 1     |
B     | 1U-9200     | Lever Puller Hoist     | 1     |
Start By:
- Remove the final drive. Refer to Disassembly and Assembly, "Final Drive - Remove".
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Attach Tooling (A) and a suitable lifting device to fender (1) . The weight of fender (1) is approximately 127 kg (280 lb). Remove fender (1) .
Show/hide table
Illustration 1 | g01039522 |
- Attach a suitable lifting device onto wheel assembly (2) . The weight of wheel assembly (2) is approximately 1678 kg (3700 lb).
Show/hide table
Illustration 2 | g01039524 |
- Attach Tooling (B) onto wheel assembly (2) in order to prevent tire movement during the removal of bearing cone (3) . Remove bearing cone (3) .
- Remove Tooling (B) . Remove wheel assembly (2) .
- Remove bearing cone (6) .Remove Duo-Cone seal (5) . Remove retainer assembly (4) .
Show/hide table
Illustration 3 | g03360963 |
- Remove Duo-Cone seal (7) from the wheel assembly. Remove bearing cups (8) and (9) .
Show/hide table
Illustration 4 | g03360967 |
Caterpillar Information System:
980H Wheel Loader Power Train Modulating Valve (Transmission Clutch) - Assemble
D8R and D8T Track-Type Tractors Engine Supplement Engine Side Guards - Remove and Install
D3G, D4G and D5G Track-Type Tractors AccuGrade Laser Display
990 Series II Wheel Loader Automatic Lubrication Grease Tank - Fill - If Equipped
980H Wheel Loader Power Train Modulating Valve (Transmission Clutch) - Disassemble
D8T Track-Type Tractor Machine Systems Steering Motor - Install
631G Wheel Tractor-Scraper Power Train Wheel, Wheel Bearings and Duo-Cone Seals (Scraper) - Install
631G Wheel Tractor-Scraper Power Train Wheel, Wheel Bearings and Duo-Cone Seals (Scraper) - Remove
980H Wheel Loader Power Train Modulating Valve (Transmission Clutch) - Install
966H and 972H Wheel Loaders Steering Cylinder Bearings - Lubricate
980H Wheel Loader Power Train Modulating Valve (Transmission Clutch) - Remove
AD30 Underground Articulated Truck Machine Systems Steering Cylinder - Remove
637G Wheel Tractor-Scraper Wheel Tractor Power Train Wheel, Wheel Bearings and Duo-Cone Seals (Tractor) - Install
988H Wheel Loader Power Train Torque Converter Stall - Test
966H and 972H Wheel Loaders Bucket Linkage and Loader Cylinder Bearings - Lubricate
D8T Track-Type Tractor Engine Supplement Engine Oil Cooler - Remove and Install
980H Wheel Loader Power Train Relief Valve (Transmission Hydraulic Control) - Disassemble
924H, 924HZ, 928HZ and 930H Wheel Loaders Power Train Oscillating Axle Housing
C11 and C13 Engines for Caterpillar Built Machines Fuel System
980H Wheel Loader Power Train Relief Valve (Transmission Hydraulic Control) - Assemble
980H Wheel Loader Power Train Relief Valve (Torque Converter Outlet) - Remove
980H Wheel Loader Power Train Relief Valve (Torque Converter Outlet) - Install
966H and 972H Wheel Loaders Cooling System Water Temperature Regulator - Replace
3126B Engines Fuel System