980H Wheel Loader Power Train Caterpillar


Modulating Valve (Transmission Clutch) - Install

Usage:

980H A8J

安装步骤




    图 1g01105593

  1. 将密封件 (6) 安装到调节阀 (3) 上。



    图 2g01105574

  1. 安装调节阀 (3) 。 安装夹子 (4) ,然后安装螺栓 (1) 。 拧紧螺栓 (1) 至扭矩为 30 ± 4 N·m (22 ± 3 lb ft)。 连接线束组件 (5) 。 连接软管组件 (2) 。

Caterpillar Information System:

966H and 972H Wheel Loaders Steering Cylinder Bearings - Lubricate
980H Wheel Loader Power Train Modulating Valve (Transmission Clutch) - Remove
AD30 Underground Articulated Truck Machine Systems Steering Cylinder - Remove
AD30 Underground Articulated Truck Machine Systems Gear Pump (Hoist, Steering, Brake, and Pilot) - Remove
2004/10/25 New Post-Turn Seals and New Thrust Rings Are Now Available {4169, 4171}
D8T Track-Type Tractor Machine Systems Steering Motor - Remove
980H Wheel Loader Power Train Relief Valve (Transmission Hydraulic Control) - Install
930G Wheel Loader Power Train Engine and Transmission Mounting
D8T Track-Type Tractor Machine Systems Control Manifold - Install
D8T, D9T, D10T and D11T Track-Type Tractors MID 082 - CID 0885 - FMI 05
D8T, D9T, D10T and D11T Track-Type Tractors MID 082 - CID 0885 - FMI 03
966H and 972H Wheel Loaders Battery Hold-Down - Tighten
631G Wheel Tractor-Scraper Power Train Wheel, Wheel Bearings and Duo-Cone Seals (Scraper) - Remove
631G Wheel Tractor-Scraper Power Train Wheel, Wheel Bearings and Duo-Cone Seals (Scraper) - Install
D8T Track-Type Tractor Machine Systems Steering Motor - Install
980H Wheel Loader Power Train Modulating Valve (Transmission Clutch) - Disassemble
990 Series II Wheel Loader Automatic Lubrication Grease Tank - Fill - If Equipped
D3G, D4G and D5G Track-Type Tractors AccuGrade Laser Display
D8R and D8T Track-Type Tractors Engine Supplement Engine Side Guards - Remove and Install
980H Wheel Loader Power Train Modulating Valve (Transmission Clutch) - Assemble
637G Wheel Tractor-Scraper Wheel Tractor Power Train Wheel, Wheel Bearings and Duo-Cone Seals (Tractor) - Remove
637G Wheel Tractor-Scraper Wheel Tractor Power Train Wheel, Wheel Bearings and Duo-Cone Seals (Tractor) - Install
988H Wheel Loader Power Train Torque Converter Stall - Test
966H and 972H Wheel Loaders Bucket Linkage and Loader Cylinder Bearings - Lubricate
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.