Steering Motor - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | FT-1114     | Vacuum Cap     | 1     |
5P-0306 | Vacuum Transducer     | 1     | |
6V-4142 | Fitting     | 1     | |
5K-5068 | Fitting     | 1     |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Attach a suitable lifting device to steering motor (6) and position steering motor (6). The weight of steering motor (6) is approximately 39 kg (85 lb). Install bolts (4) .
Show/hide table
Illustration 1 | g01105582 |
- Connect harness assembly (5) .
Show/hide table
Illustration 2 | g01106751 |
- Install hose assemblies (2). Install hose assemblies (3) .
Show/hide table
Illustration 3 | g01105567 |
- Install floorplates (1) .
Show/hide table
Illustration 4 | g01105553 |
- Remove Tooling (A) and install the hydraulic tank cap.
Show/hide table
Illustration 5 | g01105562 |
Caterpillar Information System:
631G Wheel Tractor-Scraper Power Train Wheel, Wheel Bearings and Duo-Cone Seals (Scraper) - Install
631G Wheel Tractor-Scraper Power Train Wheel, Wheel Bearings and Duo-Cone Seals (Scraper) - Remove
980H Wheel Loader Power Train Modulating Valve (Transmission Clutch) - Install
966H and 972H Wheel Loaders Steering Cylinder Bearings - Lubricate
980H Wheel Loader Power Train Modulating Valve (Transmission Clutch) - Remove
AD30 Underground Articulated Truck Machine Systems Steering Cylinder - Remove
AD30 Underground Articulated Truck Machine Systems Gear Pump (Hoist, Steering, Brake, and Pilot) - Remove
2004/10/25 New Post-Turn Seals and New Thrust Rings Are Now Available {4169, 4171}
D8T Track-Type Tractor Machine Systems Steering Motor - Remove
980H Wheel Loader Power Train Relief Valve (Transmission Hydraulic Control) - Install
930G Wheel Loader Power Train Engine and Transmission Mounting
D8T Track-Type Tractor Machine Systems Control Manifold - Install
980H Wheel Loader Power Train Modulating Valve (Transmission Clutch) - Disassemble
990 Series II Wheel Loader Automatic Lubrication Grease Tank - Fill - If Equipped
D3G, D4G and D5G Track-Type Tractors AccuGrade Laser Display
D8R and D8T Track-Type Tractors Engine Supplement Engine Side Guards - Remove and Install
980H Wheel Loader Power Train Modulating Valve (Transmission Clutch) - Assemble
637G Wheel Tractor-Scraper Wheel Tractor Power Train Wheel, Wheel Bearings and Duo-Cone Seals (Tractor) - Remove
637G Wheel Tractor-Scraper Wheel Tractor Power Train Wheel, Wheel Bearings and Duo-Cone Seals (Tractor) - Install
988H Wheel Loader Power Train Torque Converter Stall - Test
966H and 972H Wheel Loaders Bucket Linkage and Loader Cylinder Bearings - Lubricate
D8T Track-Type Tractor Engine Supplement Engine Oil Cooler - Remove and Install
980H Wheel Loader Power Train Relief Valve (Transmission Hydraulic Control) - Disassemble
924H, 924HZ, 928HZ and 930H Wheel Loaders Power Train Oscillating Axle Housing