Wheel, Wheel Bearings and Duo-Cone Seals (Scraper) - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 155-3597     | Wheel Chock     | 4     |
B     | 9U-7536     | Lift Stand     | 2     |
8S-7645 | Hydraulic Jack Hose Gp     | 2     | |
4C-5809 | Electric Hydraulic Pump Gp     | 1     | |
C     | 138-7574     | Link Bracket     | 2     |
D     | 1U-6434     | Duo-Cone Seal Installer As     | 1     |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Install O-ring seal (16) onto retainer (12) .
Show/hide table
Illustration 1 | g01075530 |
- Install retainer (12) .
Show/hide table
Illustration 2 | g01075525 |
- Use Tooling (D) to install Duo-Cone seal (13) .
- Install spacer (15) .
- Install bearing cone (14) .
- Install bearing cups (11). Use Tooling (D) to install Duo-Cone seal (10) .
Show/hide table
Illustration 3 | g01075524 |
- Attach a suitable lifting device to wheel (8). The weight of wheel (8) is approximately 1905 kg (4200 lb). Position wheel (8) .
Show/hide table
Illustration 4 | g01075522 |
- Install the O-ring seal and the shims. Use the shims to set the proper bearing preload. Refer to Testing and Adjusting, "Wheel Bearings - Adjust". Install retainer (9) .
- Install the O-ring seal and cover (6). Refill the wheel. Refer to Operation and Maintenance Manual, "Capacities - Refill".
Show/hide table
Illustration 5 | g01075521 |
- Attach Tooling (C) and a suitable lifting device onto fender (5). The weight of fender (5) is approximately 91 kg (200 lb). Install fender (5) .
- Connect the brakes for the scraper.
Show/hide table
Illustration 6 | g01108398 |
- Install pin (4) .
- Adjust the service brakes. Refer to Testing and Adjusting, "Service Brake - Adjust".
- Remove Tooling (B) .
Show/hide table
Illustration 7 | g00843933 |
- Remove Tooling (A) .
Show/hide table
Illustration 8 | g00825470 |
Caterpillar Information System:
631G Wheel Tractor-Scraper Power Train Wheel, Wheel Bearings and Duo-Cone Seals (Scraper) - Remove
980H Wheel Loader Power Train Modulating Valve (Transmission Clutch) - Install
966H and 972H Wheel Loaders Steering Cylinder Bearings - Lubricate
980H Wheel Loader Power Train Modulating Valve (Transmission Clutch) - Remove
AD30 Underground Articulated Truck Machine Systems Steering Cylinder - Remove
AD30 Underground Articulated Truck Machine Systems Gear Pump (Hoist, Steering, Brake, and Pilot) - Remove
2004/10/25 New Post-Turn Seals and New Thrust Rings Are Now Available {4169, 4171}
D8T Track-Type Tractor Machine Systems Steering Motor - Remove
980H Wheel Loader Power Train Relief Valve (Transmission Hydraulic Control) - Install
930G Wheel Loader Power Train Engine and Transmission Mounting
D8T Track-Type Tractor Machine Systems Control Manifold - Install
D8T, D9T, D10T and D11T Track-Type Tractors MID 082 - CID 0885 - FMI 05
D8T Track-Type Tractor Machine Systems Steering Motor - Install
980H Wheel Loader Power Train Modulating Valve (Transmission Clutch) - Disassemble
990 Series II Wheel Loader Automatic Lubrication Grease Tank - Fill - If Equipped
D3G, D4G and D5G Track-Type Tractors AccuGrade Laser Display
D8R and D8T Track-Type Tractors Engine Supplement Engine Side Guards - Remove and Install
980H Wheel Loader Power Train Modulating Valve (Transmission Clutch) - Assemble
637G Wheel Tractor-Scraper Wheel Tractor Power Train Wheel, Wheel Bearings and Duo-Cone Seals (Tractor) - Remove
637G Wheel Tractor-Scraper Wheel Tractor Power Train Wheel, Wheel Bearings and Duo-Cone Seals (Tractor) - Install
988H Wheel Loader Power Train Torque Converter Stall - Test
966H and 972H Wheel Loaders Bucket Linkage and Loader Cylinder Bearings - Lubricate
D8T Track-Type Tractor Engine Supplement Engine Oil Cooler - Remove and Install
980H Wheel Loader Power Train Relief Valve (Transmission Hydraulic Control) - Disassemble