3126B Petroleum Engine Caterpillar


Turbocharger - Install

Usage:

3126B Z2A

Installation Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     5P-3931     Anti-Seize Compound     1    


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.


  1. Apply Tooling (A) on the threads of the mounting studs for the turbocharger.



    Illustration 1g01181699

  1. Position gasket (7) and turbocharger (5) on the exhaust manifold. Install locknuts (6) .

  1. Tighten the locknuts to a torque of 54 ± 5 N·m (40 ± 4 lb ft).



    Illustration 2g01181690

  1. Connect tube assembly (3) and tube assembly (2) .

  1. Connect hose (4) and hose (1) .

  1. Fill the cooling system with coolant to the correct level. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.